Commit Graph

12677 Commits

Author SHA1 Message Date
Glenn Ruben Bakke
990341d18e nrf: Facilitate use of freeze manifest.
Update the Makefile to handle FROZEN_MANIFEST, and the README with some
small samples on how to use freeze manifests.  And add BOARD_DIR to the
Makefile which can be referenced in boards/<board>/mpconfigboard.mk to
include a board specific manifest.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
4326e08802 nrf/boards: Enable needed features for FAT/LFS1/LFS2.
Enable the following features for all boards except
nrf51 boards with SoftDevice present:

- MICROPY_VFS
- MICROPY_PY_NRF
- MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
b0fd4372c4 nrf/main: Add auto mount and auto format hook for internal flash FS. 2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke
6ff3a2afef nrf/qstrdefsport.h: Add entries for in-built FS mount points. 2021-08-08 23:17:49 +10:00
Glenn Ruben Bakke
f99aa82e85 nrf/mpconfigport.h: Enable MICROPY_PY_IO_FILEIO when an FS is enabled.
Enable MICROPY_PY_IO_FILEIO if MICROPY_VFS_FAT, MICROPY_VFS_LFS1
or MICROPY_VFS2 has been enabled.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
7a833edf37 nrf/modules/uos: Allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2. 2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
0bde907a8b nrf/Makefile: Add _fs_size linker script override from make.
Add posibility to override linker script "_fs_size" from make by adding the
FS_SIZE parameter.  The syntax of value is linker script syntax.  For
example, the value of 131072 bytes can be written as 128K like this:
FS_SIZE=128K.

If not set, default value for "_fs_size" from linker script will be used.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
c9b72ba694 nrf/mpconfigport.h: Tune FAT FS configuration.
Disable MICROPY_FATFS_MULTI_PARTITION configuration because there is no
partition table in the flash for FATFS to read.

Also, set MICROPY_FATFS_MAX_SS to the size of a flash page.  For nrf51 the
value 1024 is set.  For nrf52/nrf91 the value 4096 is set.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
b40dfa961d nrf/README: Update README.md to reflect internal file systems.
This documents parameters that can be passed to make to enable a specific
file system to included in the build.  Also, document the Makefile override
parameter "FS_SIZE" that can be used to tune the size of the flash region
to use as internal flash file system.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
85cad50266 nrf/mpconfigport.h: Expose nrf module when MICROPY_PY_NRF is set. 2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
5a873e27eb nrf/drivers: Add support for using flash block device with SoftDevice.
Update flash.c to also be compiled in when
MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE is enabled and SoftDevice is
present.

Update bluetooth/ble_drv.c to forward flash events to flash.c when
MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE is enabled.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
127cec8cae nrf/modules/nrf: Add new nrf module with flash block device.
This commit adds the "nrf" module for port specific modules and objects.
Included in it is the "Flash" object which exposes a block device
implementation to access internal SoC flash.

Thanks to @aykevl aka Ayke van Laethem for the initial implementation.
2021-08-08 23:09:26 +10:00
Glenn Ruben Bakke
3b594f7b27 nrf/boards/common.ld: Calculate unused flash region.
Calculate the unused flash area on the target device.  The values will be
exposed by _unused_flash_start and _unused_flash_length.  The start address
and the length are not aligned to either word or pages.
2021-08-08 23:09:26 +10:00
Damien George
f834fef6bb stm32/powerctrl: Support changing frequency on WB MCUs.
This allows changing the frequency to: 100kHz, 200kHz, 400kHz, 800kHz,
1MHz, 2MHz, 4MHz, 8MHz, 16MHz, 32MHz, 64MHz.  For frequencies 2MHz and
below, low power run (LPR) mode is enabled automatically.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:41:20 +10:00
Damien George
3b32b3d1b3 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00
Damien George
f28e8b9073 stm32/usbd_desc: Rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00
Damien George
96c6b8cae3 ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
For consistency with other board-level config macros that begin with
MICROPY_HW_USB.

Also allow boards in the mimxrt, nrf and samd ports to configure these
values.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:55 +10:00
Damien George
45f9a38451 docs/library/machine.I2S.rst: Fix use of sd pin in examples.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 20:40:54 +10:00
Damien George
78718fffb1 py/mkrules: Automatically build mpy-cross if it doesn't exist.
Commit 4173950658 removed automatic building
of mpy-cross, which rebuilt it whenever any of its dependent source files
changed.

But needing to build mpy-cross, and not knowing how, is a frequent issue.
This commit aims to help by automatically building mpy-cross only if it
doesn't exist.  For Makefiles it uses an order-only prerequisite, while
for CMake it uses a custom command.

If MICROPY_MPYCROSS (which is what makemanifest.py uses to locate the
mpy-cross executable) is defined in the environment then automatic build
will not be attempted, allowing a way to prevent this auto-build if needed.

Thanks to Trammell Hudson aka @osresearch for the original idea; see #5760.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 20:25:32 +10:00
Peter Züger
d290f369d0 tests/extmod/ujson: Add tests for dump/dumps separators argument.
Basically just copied ujson_dump(s).py and added various valid/invalid
separator tests.

Signed-off-by: Peter Züger <zueger.peter@icloud.com>
2021-08-07 13:52:16 +10:00
Peter Züger
ffc854f17f extmod/modujson: Add support for dump/dumps separators keyword-argument.
Optionally enabled via MICROPY_PY_UJSON_SEPARATORS.  Enabled by default.

For dump, make sure mp_get_stream_raise is called after
mod_ujson_separators since CPython does it in this order (if both
separators and stream are invalid, separators will raise an exception
first).

Add separators argument in the docs as well.

Signed-off-by: Peter Züger <zueger.peter@icloud.com>
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 13:52:16 +10:00
Damien George
8616129f2e esp8266,esp32: Include hidden networks in WLAN.scan results.
Addresses issues #2697 and #5329.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 13:28:34 +10:00
Jim Mussared
bfc8e88ce1 esp32/mpconfigport.h: Enable reverse and inplace special methods.
Reverse operations are supported on stm32 and rp2, and esp32 has enough
space to also enable inplace operations, to make it complete.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-07 13:27:09 +10:00
Patrick Van Oosterwijck
028fc815cd esp32/boards: Add Silicognition wESP32 board configuration.
For rev 7+ boards with 16MB of flash.  Partition table allocates 2.4 MiB
for MicroPython, 11 MiB for the filesystem.
2021-08-07 12:50:13 +10:00
Will Sowerbutts
a3675294ae esp32/machine_uart: Add flow kw-arg to enable hardware flow control.
This enables optional support for the hardware UART to use the RTS and/or
CTS pins for flow control.

The new "flow" constructor keyword specifies a bitmask of RTS and/or CTS.
This matches the interface used by machine.UART on stm32 and rp2.

Previously on ESP32 it was possible to specify which pins to use for the
RTS and CTS signals, but hardware flow control was never functional: CTS
was not checked before transmitting bytes, and RTS was always driven high
(signalling no buffer space available).  With this patch, CTS and RTS both
operate as expected.

This also includes an update to the machine.UART documentation.

Signed-off-by: Will Sowerbutts <will@sowerbutts.com>
2021-08-04 13:52:15 +10:00
Mike Causer
71722c84ca rp2/boards: Add Pimoroni Tiny 2040. 2021-08-01 23:07:57 +10:00
Mike Causer
042a4bebc3 rp2/boards: Add Pimoroni Pico LiPo 16MB. 2021-08-01 23:07:05 +10:00
Mike Causer
95eff8d96a rp2/boards: Add Pimoroni Pico LiPo 4MB. 2021-08-01 23:06:06 +10:00
Mike Causer
02cbe018a5 rp2/boards: Add Adafruit QT Py RP2040. 2021-08-01 23:04:59 +10:00
Mike Causer
043848158d rp2/boards: Add Adafruit ItsyBitsy RP2040. 2021-08-01 23:03:30 +10:00
Mike Causer
e7a3e6ee6a rp2/boards/SPARKFUN_THINGPLUS: Configure I2C/SPI default pins. 2021-08-01 23:02:30 +10:00
Mike Causer
6986a8d680 rp2/boards/SPARKFUN_PROMICRO: Configure UART/I2C/SPI default pins. 2021-08-01 23:01:36 +10:00
Mike Causer
49497084f1 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure I2C/SPI default pins. 2021-08-01 17:15:18 +10:00
iabdalkader
23e2e00779 rp2/boards/ADAFRUIT_FEATHER_RP2040: Configure custom VID/PID. 2021-08-01 10:51:50 +10:00
iabdalkader
7ae9e6ef69 rp2/tusb_port: Allow boards to configure USB VID and PID.
By defining MICROPY_HW_USB_VID and MICROPY_HW_USB_PID.
2021-08-01 10:51:24 +10:00
David Lechner
afcc77cebc py/builtinimport: Fix condition for including do_execute_raw_code().
Commit e33bc597 ("py: Remove calls to file reader functions when these
are disabled.") changed the condition for one caller of
do_execute_raw_code() from

    MICROPY_PERSISTENT_CODE_LOAD

to

    MICROPY_HAS_FILE_READER && MICROPY_PERSISTENT_CODE_LOAD

The condition that enables compiling the function itself needs to be
changed to match.

Signed-off-by: David Lechner <david@pybricks.com>
2021-07-31 16:51:58 +10:00
robert-hh
4445c73b11 tools/autobuild: Add the MIMXRT1050_EVKB board to the daily builds. 2021-07-31 16:27:47 +10:00
robert-hh
b2533fe479 mimxrt/boards: Add support for the MIMXRT1050_EVKB board. 2021-07-31 16:26:39 +10:00
robert-hh
1074c784b0 mimxrt: Add support for Hyperflash chips.
Hyperflash is used by the MIMXRT1050_EVKB, MIMXRT1060_EVK and
MIMXRT1064_EVK boards.

This commit includes:
- add support for Hyperflash
- modify MIMXRT1060_EVK and MIMXRT1064_EVK to change from QSPI to
  hyperflash.
- minor incidental changes to other boards so they still build

Note: Erasing a sector on the hyperflash is slow. It takes about a second,
which seems too long, but matches the data sheet.
2021-07-31 16:25:40 +10:00
oclyke
e29259d171 extmod/uasyncio: In open_connection use address info in socket creation.
Rudimentary support for various address families.

Signed-off-by: oclyke <oclyke@gmail.com>
2021-07-31 15:33:48 +10:00
Damien George
40b8ff0a6f stm32/README.md: Update supported MCUs, and submodule and mboot use.
Also mention mpremote as a way to access the REPL.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-31 15:12:13 +10:00
Tobias Thyrrestrup
60e3e51753 stm32/Makefile: Update to only pull in used Bluetooth library. 2021-07-31 15:11:46 +10:00
Tobias Thyrrestrup
7a1edb91cb stm32/boards/LEGO_HUB_NO6: Add board definition for LEGO_HUB_NO6.
Add basic support for LEGO HUB NO.6 (e.g. LEGO SPIKE Prime, LEGO MINDSTORMS
Robot Inventor).

See README.md for details.

Thanks to @dpgeorge for helping put this together.

Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-07-31 10:25:18 +10:00
Damien George
224ac355cd stm32/boards/NUCLEO_F439ZI: Add board definition for NUCLEO_F439ZI.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-27 16:46:10 +10:00
Matúš Olekšák
0f0006f4e1 stm32/boards/STM32F429DISC: Set correct UART2 pins and add UART3/6. 2021-07-26 14:38:39 +10:00
Damien George
aa0cf873bf stm32/uart: Support low baudrates on LPUART1.
By selecting a larger prescaler when needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-26 13:53:50 +10:00
Damien George
fef2114404 stm32/uart: Fix LPUART1 baudrate set/get.
It needs to use a different function because the formula to compute the
baudrate on LPUART1 is different to a normal UART.

Fixes issue #7466.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-26 13:53:50 +10:00
robert-hh
ee49ae8f82 rp2/machine_uart: Fix read when FIFO has chars but ringbuf doesn't.
Prior to this fix, if the UART hardware FIFO had a few chars but still
below the FIFO trigger threshold, and the ringbuf was empty, the read
function would timeout if timeout==0 (the default timeout).

This fix follows the suggestion of @iabdalkader.
2021-07-25 17:48:50 +10:00
iabdalkader
2e62e13455 rp2/machine_uart: Fix poll ioctl to also check hardware FIFO.
The RX IRQ does not trigger if the FIFO is less than the trigger level, in
which case characters may be available in the FIFO, yet not in the ringbuf,
and the ioctl returns false.
2021-07-25 17:11:03 +10:00
Chris Wilson
aecb697c72 stm32/boards: Add support for SparkFun STM32 MicroMod Processor board.
Signed-off-by: Chris Wilson <christopher.david.wilson@gmail.com>
2021-07-23 22:03:16 +10:00