Commit Graph

87 Commits

Author SHA1 Message Date
Damien George
0986675451 stmhal: Convert all module and method tables to use MP_ROM macros. 2017-05-06 17:03:40 +10:00
Damien George
78185e6a6c stmhal/modpyb: Use utime ticks ms/us functions instead of custom ones. 2017-03-02 15:43:14 +11:00
Damien George
89738e8240 stmhal: Rename sys_tick ticks/delay functions to corresp. mp_hal ones.
The renames are:
HAL_Delay -> mp_hal_delay_ms
sys_tick_udelay -> mp_hal_delay_us
sys_tick_get_microseconds -> mp_hal_ticks_us

And mp_hal_ticks_ms is added to provide the full set of timing functions.

Also, a separate HAL_Delay function is added which differs slightly from
mp_hal_delay_ms and is intended for use only by the ST HAL functions.
2017-03-02 15:32:32 +11:00
Damien George
27c149efe0 stmhal: Add pyb.fault_debug() function, to control hard-fault behaviour.
This new function controls what happens on a hard-fault:
- debugging disabled: board will do a reset
- debugging enabled: board will print registers and stack and flash LEDs

The default is disabled, ie to do a reset.  This is different to previous
behaviour which flashed the LEDs and waited indefinitely.
2017-02-06 13:22:17 +11:00
Damien George
84c614e729 stmhal: Convert to use VFS sub-system and new ooFatFs component.
This patch makes the following configuration changes:
- MICROPY_FSUSERMOUNT is disabled, removing old mounting infrastructure
- MICROPY_VFS is enabled, giving new VFS sub-system
- MICROPY_VFS_FAT is enabled, giving uos.VfsFat type
- MICROPY_FATFS_OO is enabled, to use new ooFatFs lib, R0.12b

User facing API should be almost unchanged.  Most notable changes are
removal of os.mkfs (use os.VfsFat.mkfs instead) and pyb.mount doesn't
allow unmounting by passing None as the device.
2017-01-27 23:22:15 +11:00
Damien George
4ebdb1f2b2 py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros.
In order to have more fine-grained control over how builtin functions are
constructed, the MP_DECLARE_CONST_FUN_OBJ macros are made more specific,
with suffix of _0, _1, _2, _3, _VAR, _VAR_BETEEN or _KW.  These names now
match the MP_DEFINE_CONST_FUN_OBJ macros.
2016-10-21 16:26:01 +11:00
Paul Sokolovsky
f059563507 stmhal/modutime: Refactor to use extmod/utime_mphal.c.
This includes making sure that utime_mphal's sleep_ms() and sleep_us()
don't sleep on negative arguments.
2016-10-14 20:42:42 +03:00
Damien George
93c4a6a3f7 all: Remove 'name' member from mp_obj_module_t struct.
One can instead lookup __name__ in the modules dict to get the value.
2016-09-22 00:23:16 +10:00
Damien George
3770cd2e70 stmhal: Expose flash and SD card as proper objects with block protocol.
You can now create (singleton) objects representing the flash and SD
card, using:

    flash = pyb.Flash()
    sdcard = pyb.SDCard()

These objects provide the block protocol.
2016-02-10 23:40:10 +00:00
Paul Sokolovsky
5b85a86ce3 extmod/fsusermount: Introduce separate mkfs() function.
Per the previously discussed plan. mount() still stays backward-compatible,
and new mkfs() is rought and takes more args than needed. But is a step
in a forward direction.
2016-02-10 00:50:07 +02:00
Damien George
401af50dc0 stmhal: Add pyb.irq_stats() to get statistics about IRQ calls.
Adds a lot of code, makes IRQs a bit less efficient, but is very useful
for debugging.  Usage: pyb.irq_stats() returns a memory view that can be
read and written, eg:

    list(pyb.irq_stats())
    pyb.irq_stats()[0]
    pyb.irq_stats()[0] = 0

The patch provides general IRQ_ENTER() and IRQ_EXIT() macros that can be
modified to provide further IRQ statistics if desired.
2015-12-22 21:00:20 +00:00
Paul Sokolovsky
3a1bbcc2ef extmod: Move fsusermount.c from stmhal for cross-port reuse. 2015-11-25 13:19:36 +02:00
Damien George
40274fec9c lib/pyexec: Move header pyexec.h from stmhal directory. 2015-11-09 13:13:09 +00:00
Damien George
83158e0e7f stmhal: Implement os.dupterm (was pyb.repl_uart).
pyb.repl_uart still exists but points to os.dupterm.
2015-10-19 21:57:41 +01:00
Damien George
d8066e999d stmhal: Add sleep_{ms,us} and ticks_{ms,us,cpu,diff} to time module.
pyb module still has pyb.delay and pyb.udelay, but these now point to
time.sleep_ms and time.sleep_us respectively.
2015-10-19 21:45:51 +01:00
Dave Hylands
504420c51d stmhal: Early version of machine module for stmhal. 2015-10-19 21:12:42 +01:00
Dave Hylands
8f59bacb92 stamhal: Add definitions for MCU_SERIES_F4 and MCU_SERIES_F7 2015-08-07 08:52:42 +01:00
Dave Hylands
5e11d2b349 stmhal: Enable SPI support for F7 MCUs. 2015-08-05 23:38:49 +01:00
Dave Hylands
34fe5a30c6 stmhal: Enable I2C support for F7 MCUs. 2015-08-05 23:38:24 +01:00
Dave Hylands
92d4b51ad5 stmhal: Add STM32F7DISC and associated changes. 2015-07-30 00:38:32 +01:00
Dave Hylands
ea8bf81058 stmhal: Replace #include "stm32f4xx_hal.h" with #include STM32_HAL_H. 2015-07-30 00:38:25 +01:00
Damien George
8657342973 stmhal: Correctly clear wake-up flag before entering standby mode. 2015-03-22 21:52:20 +00:00
Damien George
f44ace11fb stmhal: Put flash in deep power-down mode when entering stop mode.
This can get PYBv1.0 stop current down to around 290uA.
2015-03-22 17:55:50 +00:00
Damien George
48ef64a729 stmhal: Make os.sync use disk_ioctl exclusively; reuse os.sync in pyb. 2015-03-04 20:38:28 +00:00
Damien George
4f94d90d4d stmhal: Include fatfs headers using lib/fatfs prefix.
This helps make files reusable across other ports.
2015-03-04 20:35:41 +00:00
Damien George
0b32e50365 stmhal: Make pybstdio usable by other ports, and use it.
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
Damien George
d39c7aa517 stmhal: Add Python-configurable USB HID mode.
Different HID modes can be configured in Python.  You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Dave Hylands
d7f199465f stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-21 00:11:04 +00:00
Damien George
3b51b3e90f stmhal: Collect all root pointers together in 1 place.
A GC in stmhal port now only scans true root pointers, not entire BSS.
This reduces base GC time from 1700ms to 900ms.
2015-01-07 23:38:50 +00:00
Damien George
2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Damien George
7690b13953 stmhal: Add ability to mount custom block device. 2014-12-27 20:20:51 +00:00
Damien George
008251180d stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
Damien George
1960475ed7 stmhal: Make pyb.[u]delay use systick with IRQs, busy loop otherwise.
pyb.delay and pyb.udelay now use systick if IRQs are enabled, otherwise
they use a busy loop.  Thus they work correctly when IRQs are disabled.
The busy loop is computed from the current CPU frequency, so works no
matter the CPU frequency.
2014-11-30 21:23:25 +00:00
Damien George
3b603f29ec Use MP_DEFINE_CONST_DICT macro to define module dicts.
This is just a clean-up of the code.  Generated code is exactly the
same.
2014-11-29 14:39:27 +00:00
Damien George
38bd762121 stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.

Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
Dave Hylands
8d62bbd46a Add pyb.hard_reset, and make sys.exit() or raise SystemExit do a soft reset. 2014-10-22 19:14:20 +01:00
Damien George
9b6617ea8b stmhal: Add pyb.stop() and pyb.standby() functions. 2014-10-09 19:02:47 +01:00
Damien George
d03c681608 stmhal: Use mp_uint_t where appropriate.
Found these by compiling stmhal with mp_uint_t of type uint32_t instead
of unsigned int.  This actually makes a difference to the code, but just
a curiosity.
2014-10-05 21:51:54 +01:00
Damien George
6dba992182 stmhal: Add config option to disable/enable CAN driver. 2014-10-05 18:05:26 +01:00
Damien George
24119176e7 stmhal: Allow pyb.freq() function to change SYSCLK frequency.
Eg pyb.freq(120000000) sets the CPU to 120MHz.  The frequency can be set
at any point in the code, and can be changed as many times as you like.
Note that any active timers will need to be reconfigured after a freq
change.

Valid range is 24MHz to 168MHz (but not all freqs are supported).  The
code maintains a 48MHz clock for the USB at all times and it's possible
to change the frequency at a USB REPL and keep the REPL alive (well,
most of the time it stays, sometimes it resets the USB for some reason).
Note that USB does not work with pyb.freq of 24MHz.
2014-10-04 01:54:31 +01:00
Damien George
3550de4ebe stmhal: Add basic CAN bus support. 2014-10-02 17:32:02 +01:00
Dave Hylands
a21f56b2d5 Added pyb.elapsed_millis and pyb.elapsed_micros
tested using:
stmhal: https://github.com/dhylands/upy-examples/blob/master/elapsed.py
teensy: https://github.com/dhylands/upy-examples/blob/master/teensy/elapsed.py
2014-09-28 11:24:44 -07:00
Damien George
29c92a407c stmhal: Use MP_OBJ_NEW_SMALL_INT directly in pyb.micros/millis.
Also some whitespace cleanup.
2014-08-25 17:38:55 +01:00
Dave Hylands
2bf044442e Add support for pyb.micros() by using the systick timer.
I also removed trailing spaces from modpyb.c which affected a couple
of lines technically not part of this patch.

Tested using: https://github.com/dhylands/upy-examples/blob/master/micros_test.py

which eventually fails due to wraparound issues (I could fix the test to compensate
but didn't bother)
2014-08-25 17:38:55 +01:00
Dave Hylands
9480138f0c Add save/restore_irq
Factored irq functions into a separate file.
2014-08-25 12:22:11 +01:00
Damien George
b63be37be1 stmhal: In safe mode, still mount SD card and present as MSD over USB.
It's still "safe" because no scripts are run.  Remove the SD card if you
want to access the internal flash filesystem.  Addresses issue #616.

Also: remove obsolete pyb.source_dir setting, and reset pyb.main and
pyb.usb_mode settings on soft-reset.
2014-08-16 14:23:22 +01:00
Damien George
65dd7bc13d stmhal: Change 0:/ and 1:/ to /flash and /sd; add CWD support.
Some important changes to the way the file system is structured on the
pyboard:

1. 0: and 1: drive names are now replaced with POSIX inspired
directories, namely /flash and /sd.

2. Filesystem now supports the notion of a current working directory.
Supports the standard Python way of manipulating it: os.chdir and
os.getcwd.

3. On boot up, current directory is /flash if no SD inserted, else /sd
if SD inserted.  Then runs boot.py and main.py from the current dir.
This is the same as the old behaviour, but is much more consistent and
flexible (eg you can os.chdir in boot.py to change where main.py is run
from).

4. sys.path (for import) is now set to '' (current dir), plus /flash
and /flash/lib, and then /sd and /sd/lib if SD inserted.  This, along
with CWD, means that import now works properly.  You can import a file
from the current directory.

5. os.listdir is fixed to return just the basename, not the full path.

See issue #537 for background and discussion.
2014-07-31 23:44:04 +01:00
Damien George
3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George
951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George
40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00