Commit Graph

375 Commits

Author SHA1 Message Date
Damien George
f01d5fb657 py/mkrules.mk: Automatically configure frozen options when manifest set.
Following how mkrules.cmake works.  This makes it easy for a port to enable
frozen code, by defining FROZEN_MANIFEST in its Makefile.

Signed-off-by: Damien George <damien@micropython.org>
2023-06-08 23:12:56 +10:00
Jim Mussared
5fd042e7d1 all: Replace all uses of umodule in Python code.
Applies to drivers/examples/extmod/port-modules/tools.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:24 +10:00
Jim Mussared
2eba98f1e0 all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:21 +10:00
Jim Mussared
45ac651d1a all: Rename *umodule*.c to remove the "u" prefix.
Updates any includes, and references from Makefiles/CMake.

This essentially reverts what was done long ago in commit
136b5cbd76

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:17 +10:00
Jim Mussared
f5f9edf645 all: Rename UMODULE to MODULE in preprocessor/Makefile vars.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:11 +10:00
Jim Mussared
7f5d5c7271 all: Rename mod_umodule*, ^umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:07 +10:00
Jim Mussared
1bf2dcb15e all: Rename mp_umodule*, mp_module_umodule* to remove the "u" prefix.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:04 +10:00
Jim Mussared
dfe232d000 py/builtinimport: Remove weak links.
In order to keep "import umodule" working, the existing mechanism is
replaced with a simple fallback to drop the "u".

This makes importing of built-ins no longer touch the filesystem, which
makes a typical built-in import take ~0.15ms rather than 3-5ms.

(Weak links were added in c14a81662c)

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:04 +10:00
Jim Mussared
30628d1bb7 all: Rename MP_QSTR_umodule to MP_QSTR_module everywhere.
This renames the builtin-modules, such that help('modules') and printing
the module object will show "module" rather than "umodule".

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:53:57 +10:00
Jim Mussared
1d4b4f0ce2 ports: Standardise docs link in help text.
Updates all `help()` output to use the phrase:
`For online docs please visit http://docs.micropython.org/`

Some ports previously used different wording, some pointed to the wrong
link.  Also make all ports use `help.c` for consistency.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-02 11:48:46 +10:00
Damien George
38243cd8e0 extmod/machine_pwm: Remove PWM_INIT and PWM_DUTY_U16_NS config options.
All ports that enable MICROPY_PY_MACHINE_PWM now enable these two
sub-options, so remove these sub-options altogether to force consistency in
new ports that implement machine.PWM.

Signed-off-by: Damien George <damien@micropython.org>
2023-05-04 13:19:19 +10:00
Christian Clauss
2a1db770ce all: Fix cases of Python variable assigned but never used.
This fixes ruff rule F841.
2023-05-02 16:36:05 +10:00
Damien George
b1229efbd1 all: Fix spelling mistakes based on codespell check.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 18:03:06 +10:00
Damien George
a3c427898e nrf/modules/utime: Use extmod version of time module.
API additions;
- time.sleep() is added
- time.ticks_cpu() is added, but it just returns 0

No API or functional change to existing time functions.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George
9955553001 extmod/modutime: Provide a generic time module.
Based on extmod/utime_mphal.c, with:
- a globals dict added
- time.localtime wrapper added
- time.time wrapper added
- time.time_ns function added

New configuration options are added for this module:
- MICROPY_PY_UTIME (enabled at basic features level)
- MICROPY_PY_UTIME_GMTIME_LOCALTIME_MKTIME
- MICROPY_PY_UTIME_TIME_TIME_NS

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:09:56 +10:00
David Grayson
c046b23ea2 shared/runtime/pyexec: Don't allow Ctrl+C to interrupt frozen boot code.
Helps prevent the filesystem from getting formatted by mistake, among other
things.  For example, on a Pico board, entering Ctrl+D and Ctrl+C fast many
times will eventually wipe the filesystem (without warning or notice).

Further rationale: Ctrl+C is used a lot by automation scripts (eg mpremote)
and UI's (eg Mu, Thonny) to get the board into a known state.  If the board
is not responding for a short time then it's not possible to know if it's
just a slow start up (eg in _boot.py), or an infinite loop in the main
application.  The former should not be interrupted, but the latter should.
The only way to distinguish these two cases would be to wait "long enough",
and if there's nothing on the serial after "long enough" then assume it's
running the application and Ctrl+C should break out of it.  But defining
"long enough" is impossible for all the different boards and their possible
behaviour.  The solution in this commit is to make it so that frozen
start-up code cannot be interrupted by Ctrl+C.  That code then effectively
acts like normal C start-up code, which also cannot be interrupted.

Note: on the stm32 port this was never seen as an issue because all
start-up code is in C.  But now other ports start to put more things in
_boot.py and so this problem crops up.

Signed-off-by: David Grayson <davidegrayson@gmail.com>
2023-04-05 10:38:50 +10:00
robert-hh
eb6e5143c4 nrf/modules/machine/uart: Prevent UART lock-up after a receive error.
Like frame error, overrun, etc.  Fix is provided by @ricksorensen.
2023-04-05 10:00:43 +10:00
robert-hh
a529e0e8cf nrf/nrfx_config: Use UARTE for nrf52xxx devices.
It was incomplete.
2023-04-05 10:00:06 +10:00
robert-hh
408556504c nrf/modules/machine/pwm: Fix resource conflict, and change id to device.
Changes in this commit:
- Move the pwm_seq array to the p_config data structure.  That prevents
  potential resource collisions between PWM devices.
- Rename the keyword argument 'id' to 'device'.  That's consistent with the
  SAMD port as the other port allowing to specify it.
2023-04-05 09:58:33 +10:00
Damien George
38e7b842c6 ports: Implement simple write polling for stdout.
This is a best-effort implementation of write polling.  It's difficult to
do correctly because if there are multiple output streams (eg UART and USB
CDC) then some may not be writeable while others are.  A full solution
should also have a return value from mp_hal_stdout_tx_strn(), returning the
number of bytes written to the stream(s).  That's also hard to define.

The renesas-ra and stm32 ports already implement a similar best-effort
mechanism for write polling.

Fixes issue #11026.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-23 13:51:17 +11:00
robert-hh
be686e634e rp2: Allow disabling USB via MICROPY_HW_ENABLE_USBDEV config.
Previously, setting MICROPY_HW_ENABLE_USBDEV to 0 caused build errors.  The
change affects the nrf and samd ports as well, so MICROPY_HW_ENABLE_USBDEV
had to be explicitly enabled there.

The configuration options MICROPY_HW_ENABLE_USBDEV and
MICROPY_HW_ENABLE_UART_REPL are independent, and can be enabled or disabled
by a board.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-20 22:33:45 +11:00
robert-hh
a2b31f968d nrf/modules/machine: Support the freq=n argument for machine.I2C.
Mostly for compatibility.  Effective values are 100000, 250000 and 400000.
The supplied values are mapped to these.
2023-03-20 16:27:44 +11:00
robert-hh
3bbf2ef3fb nrf/modules/machine: Use a dedicated function for machine.idle().
Calling MICROPY_EVENT_POLL_HOOK.  That allows Ctrl-C to break loops with
idle().
2023-03-20 16:15:43 +11:00
robert-hh
2cd3a7b45c nrf/nrfx_config: Use the UARTE definitions and drivers for the NRF52xx.
Suggested by @ricksorensen after testing.  These match better the hardware
of the NRF52xx.
2023-03-20 16:12:16 +11:00
robert-hh
7ea192af05 nrf/modules/machine/uart: Add timeout keyword options and "any" method.
Changes in this commit:
- Add the timeout and timeout_char keyword options.
- Make uart.read() non-blocking.
- Add uart.any().
- Add ioctl MP_STREAM_POLL handling.
- Change uart.write() into non-busy waiting. uart.write() still waits until
  all data has been sent, but calls MICROPY_EVENT_POLL_HOOK while waiting.
  uart.write() uses DMA for transfer.  One option would be to add a small
  local buffer, such that transfers up to the size of the buffer could be
  done without waiting.
- As a side effect to the change of uart.write(), uart.txdone() and ioctl
  flush now report/wait correctly for the end of transmission.
- Change machine_hard_uart_buf_t in machine_hard_uart_obj_t to an instance
  of that struct, rather than a pointer to one.
2023-03-20 16:08:35 +11:00
iabdalkader
a197823eb7 ports: Fix MCU tags in Arduino board.json files. 2023-03-20 15:22:24 +11:00
Christian Clauss
4376c969f6 all: Fix Python comparison to None and True, and use "not in".
These are basic PEP8 recommendations.
2023-03-10 13:32:24 +11:00
Damien George
b3c8ab37ec py/gc: Make gc_dump_info/gc_dump_alloc_table take a printer as argument.
So that callers can redirect the output if needed.

Signed-off-by: Damien George <damien@micropython.org>
2023-03-10 10:58:10 +11:00
Damien George
f450e94ba0 ports: Rename remaining "Micro Python" to "MicroPython".
Signed-off-by: Damien George <damien@micropython.org>
2023-03-10 10:54:00 +11:00
robert-hh
ed1f42cb49 nrf/modules/machine/pwm: Support using all 4 channels of a PWM module.
These have the same frequency, but can have different duty cycle and
polarity.

pwm.deinit() stops all channels of a module, but does not release the
module.  pwm.init() without arguments restarts all outputs.
2023-03-10 10:44:02 +11:00
robert-hh
e3b877826c nrf/modules/machine/soft_pwm: Add PWM for nrf51x boards using soft PWM.
Using extmod/machine_pwm.c for the Python bindings and the existing
softpwm.c driver, by just adding the interface.

Properties:
- Frequency range 1-3906 Hz.
- All PWM outputs run at the same frequency but can have different duty
  cycles.
- Limited to the P0.x pins.

Since it uses the existing softpwm.c mechanism, it will be affected by
playing music with the music class.
2023-03-10 10:44:02 +11:00
robert-hh
a1f838cdf1 nrf/modules/machine/pwm: Use extmod/machine_pwm.c for PWM module.
This is a breaking change, making the hardware PWM on the nrf port
compatible with the other ports providing machine.PWM.

Frequency range 4Hz - ~5.4 MHz.  The base clock range is 125kHz to 16 MHz,
and the divider range is 3 - 32767.

The hardware supports up to four outputs per PWM device with different duty
cycles, but only one output is (and was) supported.
2023-03-10 10:43:55 +11:00
robert-hh
cf43df4caa nrf/modules/machine/pwm: Add paramter checks and error messages. 2023-03-10 10:30:16 +11:00
iabdalkader
cc645b65a9 nrf/boards/arduino_nano_33_ble_sense: Add support for REV-2 chipset.
These changes allow the firmware to support both the REV-1 and REV-2
versions of the board:
- Freeze the new device drivers used in REV-2.
- Add a board-level module that abstracts the IMU chipset.
2023-03-08 00:53:25 +11:00
Jim Mussared
69b93527d5 ports: Make BOARD default from BOARD_DIR in Makefile's.
This allows:

    $ make BOARD_DIR=path/to/board

to infer BOARD=board, rather than the previous behavior that required
additionally setting BOARD explicitly.

Also makes the same change for VARIANT_DIR -> VARIANT on Unix.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-02-23 09:47:08 +11:00
iabdalkader
68d049ea5e nrf/Makefile: Add support for BOSSAC flasher.
Used by Arduino boards.
2023-02-16 12:46:23 +11:00
Jim Mussared
8b27482692 top: Update Python formatting to black "2023 stable style".
See https://black.readthedocs.io/en/stable/the_black_code_style/index.html

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-02-02 12:51:03 +11:00
robert-hh
0baf6c80d9 nrf/mpconfigport: Enable seeding of the PRNG by the hardware RNG.
A suitable function already existed, so just the declaration was needed.
2023-01-28 15:23:26 +11:00
robert-hh
564945a2a0 nrf/boards/seeed_xiao_nrf52: Add defn for Seeed XIAO NRF52840 Sense.
It keeps compatibility with the XIAO bootloader by:
- using Soft Device 7.3.0
- reserving 48k memory for the bootloader.

So on double reset a drive pops for uploading an uf2 image or a nrfutil zip
pkg file.  Instructions to create it from a hex file are included.  The
bootloader can as well be activated with the touch 1200 option of nrfutil.

The script download_ble_stack.sh has been adapted to get the version 7.3.0
soft device files.  It may have to be executed once before building.

The file system is set to 256k and the pin definitions are adapted.
Besides that, it has the common functionality and omissions.  The on-board
sensors and additional flash can be supported by Python scripts.
2022-12-15 14:27:08 +11:00
Angus Gratton
2e6e53057b shared/tinyusb: Further refactor static USB device implementation.
App the mp_ prefix to usbd_ symbols and files which are defined here and
not in TinyUSB.

rp2 only for now. This includes some groundwork for dynamic USB devices
(defined in Python).

This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2022-11-11 16:47:36 +11:00
Damien George
e8f5cfe0e1 nrf: Rename MICROPY_PY_MACHINE_TIMER to MICROPY_PY_MACHINE_TIMER_NRF.
So that it doesn't clash with the extmod version.

Also make the default for this enabled, so that most boards do not need to
configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-27 14:30:58 +11:00
iabdalkader
93f3910fe7 nrf: Rename machine I2C, PWM, SPI, UART types consistently across ports.
This renames:
- machine_hard_i2c_type -> machine_i2c_type
- machine_hard_pwm_type -> machine_pwm_type
- machine_hard_spi_type -> machine_spi_type
- machine_hard_uart_type -> machine_uart_type
2022-10-22 12:58:54 +11:00
Jim Mussared
a2aceb5007 nrf/Makefile: Split up SRC_C variables.
This improves clarity a bit, but also ensures that only the required files
are added to SRC_QSTR.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-12 00:09:55 +11:00
Jim Mussared
d6d8722558 extmod: Make extmod.mk self-contained.
This makes it so that all a port needs to do is set the relevant variables
and "include extmod.mk" and doesn't need to worry about adding anything to
OBJ, CFLAGS, SRC_QSTR, etc.

Make all extmod variables (src, flags, etc) private to extmod.mk.

Also move common/shared, extmod-related fragments (e.g. wiznet, cyw43,
bluetooth) into extmod.mk.

Now that SRC_MOD, CFLAGS_MOD, CXXFLAGS_MOD are unused by both extmod.mk
(and user-C-modules in a previous commit), remove all uses of them from
port makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:31:49 +11:00
Jim Mussared
67d05ed02b ports: Make generated pin.c handling more consistent across ports.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:18:46 +11:00
Jim Mussared
17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
Jim Mussared
94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared
6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared
a52cd5b07d py/obj: Add accessors for type slots and use everywhere.
This is a no-op, but sets the stage for changing the mp_obj_type_t
representation.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:07 +10:00
Jim Mussared
9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00