all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.

To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2022-06-07 14:41:25 +10:00
parent 66dfe17b18
commit 9670a156da
14 changed files with 33 additions and 33 deletions

View File

@ -6,7 +6,7 @@ class WIZNET5K -- control WIZnet5x00 Ethernet modules
This class allows you to control WIZnet5x00 Ethernet adaptors based on This class allows you to control WIZnet5x00 Ethernet adaptors based on
the W5200 and W5500 chipsets. The particular chipset that is supported the W5200 and W5500 chipsets. The particular chipset that is supported
by the firmware is selected at compile-time via the MICROPY_PY_WIZNET5K by the firmware is selected at compile-time via the MICROPY_PY_NETWORK_WIZNET5K
option. option.
Example usage:: Example usage::

View File

@ -40,7 +40,7 @@
#include "modmachine.h" #include "modmachine.h"
#include "drivers/bus/spi.h" #include "drivers/bus/spi.h"
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
#include "lib/wiznet5k/Ethernet/wizchip_conf.h" #include "lib/wiznet5k/Ethernet/wizchip_conf.h"
@ -1039,4 +1039,4 @@ const mod_network_nic_type_t mod_network_nic_type_wiznet5k = {
}; };
#endif #endif
#endif // MICROPY_PY_WIZNET5K #endif // MICROPY_PY_NETWORK_WIZNET5K

View File

@ -234,11 +234,11 @@ if (MICROPY_PY_NETWORK_NINAW10)
) )
endif() endif()
if (MICROPY_PY_WIZNET5K) if (MICROPY_PY_NETWORK_WIZNET5K)
target_compile_definitions(${MICROPY_TARGET} PRIVATE target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_WIZNET5K=1 MICROPY_PY_NETWORK_WIZNET5K=1
WIZCHIP_PREFIXED_EXPORTS=1 WIZCHIP_PREFIXED_EXPORTS=1
_WIZCHIP_=${MICROPY_PY_WIZNET5K} _WIZCHIP_=${MICROPY_PY_NETWORK_WIZNET5K}
WIZCHIP_YIELD=mpy_wiznet_yield WIZCHIP_YIELD=mpy_wiznet_yield
) )

View File

@ -1,4 +1,4 @@
# cmake file for Wiznet W5100S-EVB-Pico. # cmake file for Wiznet W5100S-EVB-Pico.
set(PICO_BOARD pico) set(PICO_BOARD pico)
set(MICROPY_PY_WIZNET5K W5100S) set(MICROPY_PY_NETWORK_WIZNET5K W5100S)
set(MICROPY_PY_LWIP 1) set(MICROPY_PY_LWIP 1)

View File

@ -164,7 +164,7 @@ extern const struct _mod_network_nic_type_t mod_network_nic_type_nina;
#define MICROPY_PORT_ROOT_POINTER_NINAW10 #define MICROPY_PORT_ROOT_POINTER_NINAW10
#endif #endif
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
#if MICROPY_PY_LWIP #if MICROPY_PY_LWIP
extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k; extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k;
#else #else

View File

@ -39,7 +39,7 @@ static alarm_id_t lwip_alarm_id = -1;
static bool lwip_can_poll = true; static bool lwip_can_poll = true;
static bool lwip_poll_pending = false; static bool lwip_poll_pending = false;
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
static bool wiznet_poll_pending = false; static bool wiznet_poll_pending = false;
void wiznet5k_poll(void); void wiznet5k_poll(void);
@ -64,7 +64,7 @@ void lwip_lock_acquire(void) {
void lwip_lock_release(void) { void lwip_lock_release(void) {
lwip_can_poll = false; lwip_can_poll = false;
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
if (wiznet_poll_pending) { if (wiznet_poll_pending) {
wiznet5k_poll(); wiznet5k_poll();
wiznet_poll_pending = false; wiznet_poll_pending = false;
@ -90,7 +90,7 @@ uint32_t lwip_try_poll(void) {
return ret; return ret;
} }
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
void wiznet5k_try_poll(void) { void wiznet5k_try_poll(void) {
if (lwip_can_poll) { if (lwip_can_poll) {
lwip_can_poll = false; lwip_can_poll = false;
@ -103,14 +103,14 @@ void wiznet5k_try_poll(void) {
#endif #endif
STATIC int64_t alarm_callback(alarm_id_t id, void *user_data) { STATIC int64_t alarm_callback(alarm_id_t id, void *user_data) {
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
wiznet5k_try_poll(); wiznet5k_try_poll();
#endif #endif
return (int64_t)lwip_try_poll() * 1000; return (int64_t)lwip_try_poll() * 1000;
} }
void mod_network_lwip_init(void) { void mod_network_lwip_init(void) {
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
wiznet5k_deinit(); wiznet5k_deinit();
#endif #endif
if (lwip_alarm_id != -1) { if (lwip_alarm_id != -1) {

View File

@ -449,17 +449,17 @@ DRIVERS_SRC_C += drivers/cyw43/cyw43_ctrl.c drivers/cyw43/cyw43_lwip.c
LIBS += $(TOP)/drivers/cyw43/libcyw43.a LIBS += $(TOP)/drivers/cyw43/libcyw43.a
endif endif
ifneq ($(MICROPY_PY_WIZNET5K),0) ifneq ($(MICROPY_PY_NETWORK_WIZNET5K),0)
WIZNET5K_DIR=drivers/wiznet5k WIZNET5K_DIR=drivers/wiznet5k
INC += -I$(TOP)/$(WIZNET5K_DIR) INC += -I$(TOP)/$(WIZNET5K_DIR)
CFLAGS_MOD += -DMICROPY_PY_WIZNET5K=$(MICROPY_PY_WIZNET5K) -D_WIZCHIP_=$(MICROPY_PY_WIZNET5K) CFLAGS_MOD += -DMICROPY_PY_WIZNET5K=$(MICROPY_PY_NETWORK_WIZNET5K) -D_WIZCHIP_=$(MICROPY_PY_NETWORK_WIZNET5K)
ifeq ($(MICROPY_PY_LWIP),1) ifeq ($(MICROPY_PY_LWIP),1)
# When using MACRAW mode (with lwIP), maximum buffer space must be used for the raw socket # When using MACRAW mode (with lwIP), maximum buffer space must be used for the raw socket
CFLAGS_MOD += -DWIZCHIP_USE_MAX_BUFFER CFLAGS_MOD += -DWIZCHIP_USE_MAX_BUFFER
endif endif
SRC_MOD += network_wiznet5k.c modnwwiznet5k.c SRC_MOD += network_wiznet5k.c modnwwiznet5k.c
SRC_MOD += $(addprefix $(WIZNET5K_DIR)/,\ SRC_MOD += $(addprefix $(WIZNET5K_DIR)/,\
ethernet/w$(MICROPY_PY_WIZNET5K)/w$(MICROPY_PY_WIZNET5K).c \ ethernet/w$(MICROPY_PY_NETWORK_WIZNET5K)/w$(MICROPY_PY_NETWORK_WIZNET5K).c \
ethernet/wizchip_conf.c \ ethernet/wizchip_conf.c \
ethernet/socket.c \ ethernet/socket.c \
internet/dns/dns.c \ internet/dns/dns.c \

View File

@ -38,7 +38,7 @@
#include "pin.h" #include "pin.h"
#include "spi.h" #include "spi.h"
#if MICROPY_PY_WIZNET5K && !MICROPY_PY_LWIP #if MICROPY_PY_NETWORK_WIZNET5K && !MICROPY_PY_LWIP
#include "ethernet/wizchip_conf.h" #include "ethernet/wizchip_conf.h"
#include "ethernet/socket.h" #include "ethernet/socket.h"
@ -419,7 +419,7 @@ STATIC mp_obj_t wiznet5k_regs(mp_obj_t self_in) {
if (i % 16 == 0) { if (i % 16 == 0) {
printf("\n %04x:", i); printf("\n %04x:", i);
} }
#if MICROPY_PY_WIZNET5K == 5200 #if MICROPY_PY_NETWORK_WIZNET5K == 5200
uint32_t reg = i; uint32_t reg = i;
#else #else
uint32_t reg = _W5500_IO_BASE_ | i << 8; uint32_t reg = _W5500_IO_BASE_ | i << 8;
@ -432,7 +432,7 @@ STATIC mp_obj_t wiznet5k_regs(mp_obj_t self_in) {
if (i % 16 == 0) { if (i % 16 == 0) {
printf("\n %04x:", i); printf("\n %04x:", i);
} }
#if MICROPY_PY_WIZNET5K == 5200 #if MICROPY_PY_NETWORK_WIZNET5K == 5200
uint32_t reg = WIZCHIP_SREG_ADDR(sn, i); uint32_t reg = WIZCHIP_SREG_ADDR(sn, i);
#else #else
uint32_t reg = _W5500_IO_BASE_ | i << 8 | WIZCHIP_SREG_BLOCK(sn) << 3; uint32_t reg = _W5500_IO_BASE_ | i << 8 | WIZCHIP_SREG_BLOCK(sn) << 3;
@ -510,4 +510,4 @@ const mod_network_nic_type_t mod_network_nic_type_wiznet5k = {
.ioctl = wiznet5k_socket_ioctl, .ioctl = wiznet5k_socket_ioctl,
}; };
#endif // MICROPY_PY_WIZNET5K && !MICROPY_PY_LWIP #endif // MICROPY_PY_NETWORK_WIZNET5K && !MICROPY_PY_LWIP

View File

@ -201,7 +201,7 @@ extern const struct _mp_obj_type_t mp_network_cyw43_type;
#define MICROPY_HW_NIC_CYW43 #define MICROPY_HW_NIC_CYW43
#endif #endif
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
#if MICROPY_PY_LWIP #if MICROPY_PY_LWIP
extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k; extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k;
#else #else

View File

@ -4,7 +4,7 @@
# 0 : no Wiznet support # 0 : no Wiznet support
# 5200 : support for W5200 module # 5200 : support for W5200 module
# 5500 : support for W5500 module # 5500 : support for W5500 module
MICROPY_PY_WIZNET5K ?= 0 MICROPY_PY_NETWORK_WIZNET5K ?= 0
# cc3k module for wifi support # cc3k module for wifi support
MICROPY_PY_CC3K ?= 0 MICROPY_PY_CC3K ?= 0

View File

@ -48,7 +48,7 @@
// Poll lwIP every 128ms // Poll lwIP every 128ms
#define LWIP_TICK(tick) (((tick) & ~(SYSTICK_DISPATCH_NUM_SLOTS - 1) & 0x7f) == 0) #define LWIP_TICK(tick) (((tick) & ~(SYSTICK_DISPATCH_NUM_SLOTS - 1) & 0x7f) == 0)
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
void wiznet5k_poll(void); void wiznet5k_poll(void);
#endif #endif
@ -57,7 +57,7 @@ u32_t sys_now(void) {
} }
STATIC void pyb_lwip_poll(void) { STATIC void pyb_lwip_poll(void) {
#if MICROPY_PY_WIZNET5K #if MICROPY_PY_NETWORK_WIZNET5K
// Poll the NIC for incoming data // Poll the NIC for incoming data
wiznet5k_poll(); wiznet5k_poll();
#endif #endif

View File

@ -32,7 +32,7 @@
#include "extmod/modnetwork.h" #include "extmod/modnetwork.h"
#include "spi.h" #include "spi.h"
#if MICROPY_PY_WIZNET5K && MICROPY_PY_LWIP #if MICROPY_PY_NETWORK_WIZNET5K && MICROPY_PY_LWIP
#include "shared/netutils/netutils.h" #include "shared/netutils/netutils.h"
#include "drivers/wiznet5k/ethernet/socket.h" #include "drivers/wiznet5k/ethernet/socket.h"
@ -295,7 +295,7 @@ STATIC mp_obj_t wiznet5k_regs(mp_obj_t self_in) {
if (i % 16 == 0) { if (i % 16 == 0) {
printf("\n %04x:", i); printf("\n %04x:", i);
} }
#if MICROPY_PY_WIZNET5K == 5200 #if MICROPY_PY_NETWORK_WIZNET5K == 5200
uint32_t reg = i; uint32_t reg = i;
#else #else
uint32_t reg = _W5500_IO_BASE_ | i << 8; uint32_t reg = _W5500_IO_BASE_ | i << 8;
@ -308,7 +308,7 @@ STATIC mp_obj_t wiznet5k_regs(mp_obj_t self_in) {
if (i % 16 == 0) { if (i % 16 == 0) {
printf("\n %04x:", i); printf("\n %04x:", i);
} }
#if MICROPY_PY_WIZNET5K == 5200 #if MICROPY_PY_NETWORK_WIZNET5K == 5200
uint32_t reg = WIZCHIP_SREG_ADDR(sn, i); uint32_t reg = WIZCHIP_SREG_ADDR(sn, i);
#else #else
uint32_t reg = _W5500_IO_BASE_ | i << 8 | WIZCHIP_SREG_BLOCK(sn) << 3; uint32_t reg = _W5500_IO_BASE_ | i << 8 | WIZCHIP_SREG_BLOCK(sn) << 3;
@ -462,4 +462,4 @@ const mp_obj_type_t mod_network_nic_type_wiznet5k = {
.locals_dict = (mp_obj_dict_t *)&wiznet5k_locals_dict, .locals_dict = (mp_obj_dict_t *)&wiznet5k_locals_dict,
}; };
#endif // MICROPY_PY_WIZNET5K && MICROPY_PY_LWIP #endif // MICROPY_PY_NETWORK_WIZNET5K && MICROPY_PY_LWIP

View File

@ -32,16 +32,16 @@ fi
# build the versions # build the versions
do_build pybv3 PYBV3 do_build pybv3 PYBV3
do_build pybv3-network PYBV3 MICROPY_PY_WIZNET5K=5200 MICROPY_PY_CC3K=1 do_build pybv3-network PYBV3 MICROPY_PY_NETWORK_WIZNET5K=5200 MICROPY_PY_CC3K=1
do_build pybv10-dp PYBV10 MICROPY_FLOAT_IMPL=double do_build pybv10-dp PYBV10 MICROPY_FLOAT_IMPL=double
do_build pybv10-thread PYBV10 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pybv10-thread PYBV10 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pybv10-dp-thread PYBV10 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pybv10-dp-thread PYBV10 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pybv10-network PYBV10 MICROPY_PY_WIZNET5K=5200 MICROPY_PY_CC3K=1 do_build pybv10-network PYBV10 MICROPY_PY_NETWORK_WIZNET5K=5200 MICROPY_PY_CC3K=1
do_build pybv11-dp PYBV11 MICROPY_FLOAT_IMPL=double do_build pybv11-dp PYBV11 MICROPY_FLOAT_IMPL=double
do_build pybv11-thread PYBV11 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pybv11-thread PYBV11 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pybv11-dp-thread PYBV11 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pybv11-dp-thread PYBV11 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pybv11-network PYBV11 MICROPY_PY_WIZNET5K=5200 MICROPY_PY_CC3K=1 do_build pybv11-network PYBV11 MICROPY_PY_NETWORK_WIZNET5K=5200 MICROPY_PY_CC3K=1
do_build pyblitev10-dp PYBLITEV10 MICROPY_FLOAT_IMPL=double do_build pyblitev10-dp PYBLITEV10 MICROPY_FLOAT_IMPL=double
do_build pyblitev10-thread PYBLITEV10 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pyblitev10-thread PYBLITEV10 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pyblitev10-dp-thread PYBLITEV10 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1' do_build pyblitev10-dp-thread PYBLITEV10 MICROPY_FLOAT_IMPL=double CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
do_build pyblitev10-network PYBLITEV10 MICROPY_PY_WIZNET5K=5200 MICROPY_PY_CC3K=1 do_build pyblitev10-network PYBLITEV10 MICROPY_PY_NETWORK_WIZNET5K=5200 MICROPY_PY_CC3K=1

View File

@ -305,7 +305,7 @@ function ci_stm32_pyb_build {
make ${MAKEOPTS} -C ports/stm32 submodules make ${MAKEOPTS} -C ports/stm32 submodules
git submodule update --init lib/btstack git submodule update --init lib/btstack
git submodule update --init lib/mynewt-nimble git submodule update --init lib/mynewt-nimble
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBV11 MICROPY_PY_WIZNET5K=5200 MICROPY_PY_CC3K=1 USER_C_MODULES=../../examples/usercmodule make ${MAKEOPTS} -C ports/stm32 BOARD=PYBV11 MICROPY_PY_NETWORK_WIZNET5K=5200 MICROPY_PY_CC3K=1 USER_C_MODULES=../../examples/usercmodule
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2 make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF6 NANBOX=1 MICROPY_BLUETOOTH_NIMBLE=0 MICROPY_BLUETOOTH_BTSTACK=1 make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF6 NANBOX=1 MICROPY_BLUETOOTH_NIMBLE=0 MICROPY_BLUETOOTH_BTSTACK=1
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBV10 CFLAGS_EXTRA='-DMBOOT_FSLOAD=1 -DMBOOT_VFS_LFS2=1' make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBV10 CFLAGS_EXTRA='-DMBOOT_FSLOAD=1 -DMBOOT_VFS_LFS2=1'