micropython/ports/mimxrt/boards/MIMXRT1064_EVK/mpconfigboard.mk

MCU_SERIES = MIMXRT1064
MCU_VARIANT = MIMXRT1064DVL6A

MICROPY_FLOAT_IMPL = double
MICROPY_PY_MACHINE_SDCARD = 1
BOARD_FLASH_TYPE ?= hyperflash
BOARD_FLASH_SIZE ?= 0x4000000  # 64MB

JLINK_PATH ?= /media/RT1064-EVK/

deploy: $(BUILD)/firmware.bin
	cp $< $(JLINK_PATH)
mimxrt/boards: Add MIMXRT1064_EVK board. 2020-04-07 15:54:01 +08:00			`MCU_SERIES = MIMXRT1064`
			`MCU_VARIANT = MIMXRT1064DVL6A`

mimxrt: Add floating point support. Since not all boards support double fp, all board specific .mk files are affected too. 2021-05-26 17:29:34 +08:00			`MICROPY_FLOAT_IMPL = double`
mimxrt/sdcard: Implement SDCard driver. - Configures `PLL2->PFD0` with 198MHz as base clock of `USDHCx` peripheral. - Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD` - Adds creation of pin defines for SDCard to make-pins.py - Adds new configuration option for SDCard peripheral pinout to mpconfigport.h - Adds interrupt handling support instead of polling - Adds support for `ADMA2` powered data transfer - Configures SDCard to run in HS (high-speed mode) with 50MHz only! SDCard support is optional and requires `USDHC` peripheral. Thus this driver is not available on `MIMXRT1010_EVK`. SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1` in mpconfigboard.mk. Signed-off-by: Philipp Ebensberger 2021-08-01 17:20:39 +08:00			`MICROPY_PY_MACHINE_SDCARD = 1`
mimxrt: Rework flash configuration. - Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger 2021-08-21 03:41:58 +08:00			`BOARD_FLASH_TYPE ?= hyperflash`
			`BOARD_FLASH_SIZE ?= 0x4000000 # 64MB`
mimxrt: Add support for Hyperflash chips. Hyperflash is used by the MIMXRT1050_EVKB, MIMXRT1060_EVK and MIMXRT1064_EVK boards. This commit includes: - add support for Hyperflash - modify MIMXRT1060_EVK and MIMXRT1064_EVK to change from QSPI to hyperflash. - minor incidental changes to other boards so they still build Note: Erasing a sector on the hyperflash is slow. It takes about a second, which seems too long, but matches the data sheet. 2021-07-20 14:18:18 +08:00
mimxrt/boards: Add MIMXRT1064_EVK board. 2020-04-07 15:54:01 +08:00			`JLINK_PATH ?= /media/RT1064-EVK/`

			`deploy: $(BUILD)/firmware.bin`
			`cp $< $(JLINK_PATH)`