micropython/stmhal/boards/PYBV3/pins.csv

B13,PB13
B14,PB14
B15,PB15
C6,PC6
C7,PC7
A13,PA13
A14,PA14
A15,PA15
B3,PB3
B4,PB4
B6,PB6
B7,PB7
B8,PB8
B9,PB9
C0,PC0
C1,PC1
C2,PC2
C3,PC3
A0,PA0
A1,PA1
A2,PA2
A3,PA3
A4,PA4
A5,PA5
A6,PA6
A7,PA7
B0,PB0
B1,PB1
B10,PB10
B11,PB11
B12,PB12
LED_R1,PA8
LED_R2,PA10
LED_G1,PC4
LED_G2,PC5
SW,PA13
SD,PC13
MMA_INT,PB2
MMA_AVDD,PB5
UART1_TX,PA9
Initial checkin with STM HAL This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything. 2014-03-12 14:55:41 +08:00			`B13,PB13`
			`B14,PB14`
			`B15,PB15`
			`C6,PC6`
			`C7,PC7`
			`A13,PA13`
			`A14,PA14`
			`A15,PA15`
			`B3,PB3`
			`B4,PB4`
			`B6,PB6`
			`B7,PB7`
			`B8,PB8`
			`B9,PB9`
			`C0,PC0`
			`C1,PC1`
			`C2,PC2`
			`C3,PC3`
			`A0,PA0`
			`A1,PA1`
			`A2,PA2`
			`A3,PA3`
			`A4,PA4`
			`A5,PA5`
			`A6,PA6`
			`A7,PA7`
			`B0,PB0`
			`B1,PB1`
			`B10,PB10`
			`B11,PB11`
			`B12,PB12`
			`LED_R1,PA8`
			`LED_R2,PA10`
			`LED_G1,PC4`
			`LED_G2,PC5`
			`SW,PA13`
stmhal: Unify naming of HW config; make SD detect configurable. All board config macros now begin with MICROPY_HW_. Renamed PYBv10 to PYBV10, since macros should be all uppercase. Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD detect pin can be easily configured. 2014-03-30 19:30:35 +08:00			`SD,PC13`
stmhal: Update PYBv3 and PYBv4 pin defs to include MMA pins, and others. 2015-10-31 19:14:15 +08:00			`MMA_INT,PB2`
			`MMA_AVDD,PB5`
stmhal: Refactor UART configuration to use pin objects. This follows the pattern of other peripherals (I2C, SPI) to specify the pins using pin objects instead of a pair of GPIO port and pin number. It makes it easier to customise the UART pins for a particular board. 2016-12-05 09:21:45 +08:00			`UART1_TX,PA9`