micropython/stm/cc3k/hci.h

337 lines
12 KiB
C
Raw Normal View History

/*****************************************************************************
*
* hci.h - CC3000 Host Driver Implementation.
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend)
* & Limor Fried for Adafruit Industries
* This library works with the Adafruit CC3000 breakout
* ----> https://www.adafruit.com/products/1469
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __HCI_H__
#define __HCI_H__
#include "cc3000_common.h"
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
#define SPI_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4)
#define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5)
#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2)
//*****************************************************************************
//
// Values that can be used as HCI Commands and HCI Packet header defines
//
//*****************************************************************************
#define HCI_TYPE_CMND 0x1
#define HCI_TYPE_DATA 0x2
#define HCI_TYPE_PATCH 0x3
#define HCI_TYPE_EVNT 0x4
#define HCI_EVENT_PATCHES_DRV_REQ (1)
#define HCI_EVENT_PATCHES_FW_REQ (2)
#define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3)
#define HCI_CMND_WLAN_BASE (0x0000)
#define HCI_CMND_WLAN_CONNECT 0x0001
#define HCI_CMND_WLAN_DISCONNECT 0x0002
#define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003
#define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004
#define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005
#define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006
#define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007
#define HCI_CMND_EVENT_MASK 0x0008
#define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B
#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C
#define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D
#define HCI_CMND_SOCKET_BASE 0x1000
#define HCI_CMND_SOCKET 0x1001
#define HCI_CMND_BIND 0x1002
#define HCI_CMND_RECV 0x1004
#define HCI_CMND_ACCEPT 0x1005
#define HCI_CMND_LISTEN 0x1006
#define HCI_CMND_CONNECT 0x1007
#define HCI_CMND_BSD_SELECT 0x1008
#define HCI_CMND_SETSOCKOPT 0x1009
#define HCI_CMND_GETSOCKOPT 0x100A
#define HCI_CMND_CLOSE_SOCKET 0x100B
#define HCI_CMND_RECVFROM 0x100D
#define HCI_CMND_GETHOSTNAME 0x1010
#define HCI_CMND_MDNS_ADVERTISE 0x1011
#define HCI_DATA_BASE 0x80
#define HCI_CMND_SEND (0x01 + HCI_DATA_BASE)
#define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE)
#define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE)
#define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE)
#define HCI_CMND_NVMEM_CBASE (0x0200)
#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
#define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205)
#define HCI_CMND_NVMEM_READ (0x0201)
#define HCI_CMND_NVMEM_WRITE (0x0090)
#define HCI_CMND_NVMEM_WRITE_PATCH (0x0204)
#define HCI_CMND_READ_SP_VERSION (0x0207)
#define HCI_CMND_READ_BUFFER_SIZE 0x400B
#define HCI_CMND_SIMPLE_LINK_START 0x4000
#define HCI_CMND_NETAPP_BASE 0x2000
#define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE)
#define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE)
//*****************************************************************************
//
// Values that can be used as HCI Events defines
//
//*****************************************************************************
#define HCI_EVNT_WLAN_BASE 0x0000
#define HCI_EVNT_WLAN_CONNECT 0x0001
#define HCI_EVNT_WLAN_DISCONNECT \
0x0002
#define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \
0x0005
#define HCI_EVNT_SOCKET HCI_CMND_SOCKET
#define HCI_EVNT_BIND HCI_CMND_BIND
#define HCI_EVNT_RECV HCI_CMND_RECV
#define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT
#define HCI_EVNT_LISTEN HCI_CMND_LISTEN
#define HCI_EVNT_CONNECT HCI_CMND_CONNECT
#define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT
#define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET
#define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM
#define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT
#define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT
#define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME
#define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE
#define HCI_EVNT_SEND 0x1003
#define HCI_EVNT_WRITE 0x100E
#define HCI_EVNT_SENDTO 0x100F
#define HCI_EVNT_PATCHES_REQ 0x1000
#define HCI_EVNT_UNSOL_BASE 0x4000
#define HCI_EVNT_WLAN_UNSOL_BASE (0x8000)
#define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
0x4100
#define HCI_EVNT_NVMEM_CREATE_ENTRY \
HCI_CMND_NVMEM_CREATE_ENTRY
#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
#define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ
#define HCI_EVNT_NVMEM_WRITE (0x0202)
#define HCI_EVNT_READ_SP_VERSION \
HCI_CMND_READ_SP_VERSION
#define HCI_EVNT_INPROGRESS 0xFFFF
#define HCI_DATA_RECVFROM 0x84
#define HCI_DATA_RECV 0x85
#define HCI_DATA_NVMEM 0x91
#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
//*****************************************************************************
//
// Prototypes for the structures for APIs.
//
//*****************************************************************************
#define HCI_DATA_HEADER_SIZE (5)
#define HCI_EVENT_HEADER_SIZE (5)
#define HCI_DATA_CMD_HEADER_SIZE (5)
#define HCI_PATCH_HEADER_SIZE (6)
#define HCI_PACKET_TYPE_OFFSET (0)
#define HCI_PACKET_ARGSIZE_OFFSET (2)
#define HCI_PACKET_LENGTH_OFFSET (3)
#define HCI_EVENT_OPCODE_OFFSET (1)
#define HCI_EVENT_LENGTH_OFFSET (3)
#define HCI_EVENT_STATUS_OFFSET (4)
#define HCI_DATA_LENGTH_OFFSET (3)
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
//*****************************************************************************
//
//! hci_command_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the command's arguments buffer
//! @param ucArgsLength length of the arguments
//!
//! @return none
//!
//! @brief Initiate an HCI command.
//
//*****************************************************************************
extern unsigned short hci_command_send(unsigned short usOpcode,
unsigned char *ucArgs,
unsigned char ucArgsLength);
//*****************************************************************************
//
//! hci_data_send
//!
//! @param usOpcode command operation code
//! @param ucArgs pointer to the command's arguments buffer
//! @param usArgsLength length of the arguments
//! @param ucTail pointer to the data buffer
//! @param usTailLength buffer length
//!
//! @return none
//!
//! @brief Initiate an HCI data write operation
//
//*****************************************************************************
extern long hci_data_send(unsigned char ucOpcode,
unsigned char *ucArgs,
unsigned short usArgsLength,
unsigned short usDataLength,
const unsigned char *ucTail,
unsigned short usTailLength);
//*****************************************************************************
//
//! hci_data_command_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the data buffer
//! @param ucArgsLength arguments length
//! @param ucDataLength data length
//!
//! @return none
//!
//! @brief Prepare HCI header and initiate an HCI data write operation
//
//*****************************************************************************
extern void hci_data_command_send(unsigned short usOpcode, unsigned char *pucBuff,
unsigned char ucArgsLength, unsigned short ucDataLength);
//*****************************************************************************
//
//! hci_patch_send
//!
//! @param usOpcode command operation code
//! @param pucBuff pointer to the command's arguments buffer
//! @param patch pointer to patch content buffer
//! @param usDataLength data length
//!
//! @return none
//!
//! @brief Prepare HCI header and initiate an HCI patch write operation
//
//*****************************************************************************
extern void hci_patch_send(unsigned char ucOpcode, unsigned char *pucBuff, char *patch, unsigned short usDataLength);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // __HCI_H__