mirror of
https://github.com/licsber/micropython.git
synced 2024-09-22 10:00:24 +08:00
32 lines
1.2 KiB
Markdown
32 lines
1.2 KiB
Markdown
|
The steps below let you create and install the firmware file. For
|
||
|
|
a .uf2 type file taken from the MicroPython downloads source only
|
||
|
|
step 4 is needed. For the .hex version of the firmware file, steps
|
||
|
|
1, 3 and 4 are required.
|
||
|
|
|
||
|
|
1. Download and install u2fconv.py. It is available e.g. in the tools
|
||
|
|
directory of MicroPython.
|
||
|
|
|
||
|
|
2. Create a firmware for the SEEED nrf52840 if needed, with the command
|
||
|
|
|
||
|
|
`make BOARD=SEEED_XIAO_NRF52 -j5`
|
||
|
|
|
||
|
|
in the directory build-SEEED_XIAO_NRF52-s140. The firmware file will have the
|
||
|
|
name firmware.uf2.
|
||
|
|
|
||
|
|
3. Create the .uf2 file if needed in the build directory with the command:
|
||
|
|
|
||
|
|
`uf2conv.py -c -f 0xADA52840 -o firmware.uf2 firmware.hex`
|
||
|
|
|
||
|
|
It must report the start address as 0x27000. If you omit the -o option,
|
||
|
|
the output file will have the name flash.uf2.
|
||
|
|
|
||
|
|
4. Enable the upload mode by pushing reset twice or calling
|
||
|
|
machine.bootloader() and copy the file firmware.uf2 to the board drive,
|
||
|
|
which will pop up on your PC.
|
||
|
|
|
||
|
|
In case the XIAO bootloader is lost or overwritten, it can be found
|
||
|
|
at https://github.com/Seeed-Studio/Adafruit_nRF52_Arduino.git in different
|
||
|
|
formats. Using a JLINK adapter or interface, it can be uploaded as hex version.
|
||
|
|
The bootloader is as well available through the Arduino IDE.
|
||
|
|
|