micropython/ports/stm32/mboot/fwupdate.py

173 lines
4.6 KiB
Python
Raw Normal View History

# Update Mboot or MicroPython from a .dfu.gz file on the board's filesystem
# MIT license; Copyright (c) 2019 Damien P. George
import struct, time
import uzlib, machine, stm
FLASH_KEY1 = 0x45670123
FLASH_KEY2 = 0xcdef89ab
def check_mem_contains(addr, buf):
mem8 = stm.mem8
r = range(len(buf))
for off in r:
if mem8[addr + off] != buf[off]:
return False
return True
def check_mem_erased(addr, size):
mem16 = stm.mem16
r = range(0, size, 2)
for off in r:
if mem16[addr + off] != 0xffff:
return False
return True
def dfu_read(filename):
f = open(filename, 'rb')
hdr = f.read(3)
f.seek(0)
if hdr == b'Dfu':
pass
elif hdr == b'\x1f\x8b\x08':
f = uzlib.DecompIO(f, 16 + 15)
else:
print('Invalid firmware', filename)
return None
elems = []
hdr = f.read(11)
sig, ver, size, num_targ = struct.unpack('<5sBIB', hdr)
file_offset = 11
for i in range(num_targ):
hdr = f.read(274)
sig, alt, has_name, name, t_size, num_elem = struct.unpack('<6sBi255sII', hdr)
file_offset += 274
file_offset_t = file_offset
for j in range(num_elem):
hdr = f.read(8)
addr, e_size = struct.unpack('<II', hdr)
data = f.read(e_size)
elems.append((addr, data))
file_offset += 8 + e_size
if t_size != file_offset - file_offset_t:
print('corrupt DFU', t_size, file_offset - file_offset_t)
return None
if size != file_offset:
print('corrupt DFU', size, file_offset)
return None
hdr = f.read(16)
hdr = struct.unpack('<HHHH3sBI', hdr)
return elems
def flash_wait_not_busy():
while stm.mem32[stm.FLASH + stm.FLASH_SR] & 1 << 16:
machine.idle()
def flash_unlock():
stm.mem32[stm.FLASH + stm.FLASH_KEYR] = FLASH_KEY1
stm.mem32[stm.FLASH + stm.FLASH_KEYR] = FLASH_KEY2
def flash_lock():
stm.mem32[stm.FLASH + stm.FLASH_CR] = 1 << 31 # LOCK
def flash_erase_sector(sector):
assert 0 <= sector <= 7 # for F722
flash_wait_not_busy()
cr = (
2 << 8 # PSIZE = 32 bits
| sector << 3 # SNB
| 1 << 1 # SER
)
stm.mem32[stm.FLASH + stm.FLASH_CR] = cr
stm.mem32[stm.FLASH + stm.FLASH_CR] = cr | 1 << 16 # STRT
flash_wait_not_busy()
stm.mem32[stm.FLASH + stm.FLASH_CR] = 0
def flash_write(addr, buf):
assert len(buf) % 4 == 0
flash_wait_not_busy()
cr = (
2 << 8 # PSIZE = 32 bits
| 1 << 0 # PG
)
stm.mem32[stm.FLASH + stm.FLASH_CR] = cr
for off in range(0, len(buf), 4):
stm.mem32[addr + off] = struct.unpack_from('I', buf, off)[0]
flash_wait_not_busy()
stm.mem32[stm.FLASH + stm.FLASH_CR] = 0
def update_mboot(filename):
print('Loading file', filename)
mboot_fw = dfu_read(filename)
if mboot_fw is None:
return
if len(mboot_fw) != 1:
assert 0
mboot_addr, mboot_fw = mboot_fw[0]
if mboot_addr != 0x08000000:
assert 0
# TODO: Validate firmware in a simple way
print('Found Mboot data with size %u.' % len(mboot_fw))
chk = check_mem_contains(mboot_addr, mboot_fw)
if chk:
print('Supplied version of Mboot is already on device.')
return
print('Programming Mboot, do not turn off!')
time.sleep_ms(50)
irq = machine.disable_irq()
flash_unlock()
flash_erase_sector(0)
if len(mboot_fw) > 16 * 1024 and not check_mem_erased(mboot_addr + 16 * 1024, 16 * 1024):
flash_erase_sector(1)
flash_write(mboot_addr, mboot_fw)
flash_lock()
machine.enable_irq(irq)
print('New Mboot programmed.')
if check_mem_contains(mboot_addr, mboot_fw):
print('Verification of new Mboot succeeded.')
else:
print('Verification of new Mboot FAILED! Try rerunning.')
print('Programming finished, can now reset or turn off.')
def update_mpy(filename, fs_base, fs_len):
# Check firmware is of .dfu.gz type
try:
with open(filename, 'rb') as f:
hdr = uzlib.DecompIO(f, 16 + 15).read(6)
except Exception:
hdr = None
if hdr != b'DfuSe\x01':
print('Firmware must be a .dfu.gz file.')
return
ELEM_TYPE_END = 1
ELEM_TYPE_MOUNT = 2
ELEM_TYPE_FSLOAD = 3
ELEM_MOUNT_FAT = 1
mount_point = 1
mount = struct.pack('<BBBBLL', ELEM_TYPE_MOUNT, 10, mount_point, ELEM_MOUNT_FAT, fs_base, fs_len)
fsup = struct.pack('<BBB', ELEM_TYPE_FSLOAD, 1 + len(filename), mount_point) + bytes(filename, 'ascii')
end = struct.pack('<BB', ELEM_TYPE_END, 0)
machine.bootloader(mount + fsup + end)