micropython/stm/boards/NETDUINO_PLUS_2/pins.csv

D0,PC7
D1,PC6
D2,PA3
D3,PA2
D4,PB12
D5,PB8
D6,PB9
D7,PA1
D8,PA0
D9,PA6
D10,PB10
D11,PB15
D12,PB14
D13,PB13
A0,PC0
A1,PC1
A2,PC2
A3,PC3
A4,PC4
A5,PC5
LED,PA10
SW,PB11
PWR_LED,PC13
PWR_SD,PB1
PWR_HDR,PB2
PWR_ETH,PC15
RST_ETH,PD2
Add pin mapping code. This commit also introduces board directories and moves board specific config into the appropriate board directory. boards/stm32f4xx-af.csv was extracted from the STM32F4xx datasheet and hand-tweaked. make-pins.py takes boards/stm32f4xx-af.csv, boards/stm32f4xx-prefix.c, and boards/BOARD-NAME/pins.csv as input and generates the file build/pins_BOARD_NAME.c The generated pin file for PYBOARD4 looks like this: https://gist.github.com/dhylands/9063231 The generated pins file includes all of the supported alternate functions, and includes upsupported alternate functions as comments. See the commnet block at the top of stm/pin_map.c for details on how to use the pin mapper. I also went ahead and modified stm/gpio.c to use the pin mapper. 2014-02-18 09:57:13 +08:00			`D0,PC7`
			`D1,PC6`
			`D2,PA3`
			`D3,PA2`
			`D4,PB12`
			`D5,PB8`
			`D6,PB9`
			`D7,PA1`
			`D8,PA0`
			`D9,PA6`
			`D10,PB10`
			`D11,PB15`
			`D12,PB14`
			`D13,PB13`
			`A0,PC0`
			`A1,PC1`
			`A2,PC2`
			`A3,PC3`
			`A4,PC4`
			`A5,PC5`
			`LED,PA10`
			`SW,PB11`
			`PWR_LED,PC13`
			`PWR_SD,PB1`
			`PWR_HDR,PB2`
			`PWR_ETH,PC15`
			`RST_ETH,PD2`