micropython/ports/mimxrt/boards/TEENSY40/mpconfigboard.h

#define MICROPY_HW_BOARD_NAME "Teensy 4.0"
#define MICROPY_HW_MCU_NAME   "MIMXRT1062DVJ6A"

#define BOARD_FLASH_SIZE (2 * 1024 * 1024)

// Teensy 4.0 has 1 board LED
#define MICROPY_HW_LED1_PIN (pin_GPIO_B0_03)
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. This is an extremely minimal port to the NXP i.MX RT, in the style of the SAMD port It's largely based on the TinyUSB mimxrt implementation, using the NXP SDK. It currently supports the Teensy 4.0 board with a REPL over the USB-VCP interface. This commit also adds the NXP SDK submodule (also from TinyUSB) to lib/nxp_driver. Note: if you already have the tinyusb submodule initialized recursively you will need to run the following as the tinyusb sub-submodules have been rearranged (upstream): git submodule deinit lib/tinyusb rm -rf .git/modules/lib/tinyusb git submodule update --init lib/tinyusb 2020-01-20 19:25:51 +08:00			`#define MICROPY_HW_BOARD_NAME "Teensy 4.0"`
			`#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"`

			`#define BOARD_FLASH_SIZE (2 * 1024 * 1024)`

mimxrt: Add initial impl of machine.LED class, and basic pin support. This commit implements an LED class with rudimentary parts of a pin C API to support it. The LED class does not yet support setting an intensity. This LED class is put in the machine module for the time being, until a better place is found. One LED is supported on TEENSY40 and MIMXRT1010_EVK boards. 2020-04-13 04:00:06 +08:00			`// Teensy 4.0 has 1 board LED`
mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger 2020-08-21 22:03:21 +08:00			`#define MICROPY_HW_LED1_PIN (pin_GPIO_B0_03)`
mimxrt: Add initial impl of machine.LED class, and basic pin support. This commit implements an LED class with rudimentary parts of a pin C API to support it. The LED class does not yet support setting an intensity. This LED class is put in the machine module for the time being, until a better place is found. One LED is supported on TEENSY40 and MIMXRT1010_EVK boards. 2020-04-13 04:00:06 +08:00			`#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))`
			`#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))`