micropython/ports/cc3200/hal/inc/hw_dthe.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

393 lines
20 KiB
C
Raw Normal View History

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
//*****************************************************************************
#ifndef __HW_DTHE_H__
#define __HW_DTHE_H__
//*****************************************************************************
//
// The following are defines for the DTHE register offsets.
//
//*****************************************************************************
#define DTHE_O_SHA_IM 0x00000810
#define DTHE_O_SHA_RIS 0x00000814
#define DTHE_O_SHA_MIS 0x00000818
#define DTHE_O_SHA_IC 0x0000081C
#define DTHE_O_AES_IM 0x00000820
#define DTHE_O_AES_RIS 0x00000824
#define DTHE_O_AES_MIS 0x00000828
#define DTHE_O_AES_IC 0x0000082C
#define DTHE_O_DES_IM 0x00000830
#define DTHE_O_DES_RIS 0x00000834
#define DTHE_O_DES_MIS 0x00000838
#define DTHE_O_DES_IC 0x0000083C
#define DTHE_O_EIP_CGCFG 0x00000A00
#define DTHE_O_EIP_CGREQ 0x00000A04
#define DTHE_O_CRC_CTRL 0x00000C00
#define DTHE_O_CRC_SEED 0x00000C10
#define DTHE_O_CRC_DIN 0x00000C14
#define DTHE_O_CRC_RSLT_PP 0x00000C18
#define DTHE_O_RAND_KEY0 0x00000F00
#define DTHE_O_RAND_KEY1 0x00000F04
#define DTHE_O_RAND_KEY2 0x00000F08
#define DTHE_O_RAND_KEY3 0x00000F0C
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_SHAMD5_IMST register.
//
//******************************************************************************
#define DTHE_SHAMD5_IMST_DIN 0x00000004 // Data in: this interrupt is
// raised when DMA writes last word
// of input data to internal FIFO of
// the engine
#define DTHE_SHAMD5_IMST_COUT 0x00000002 // Context out: this interrupt is
// raised when DMA complets the
// output context movement from
// internal register
#define DTHE_SHAMD5_IMST_CIN 0x00000001 // context in: this interrupt is
// raised when DMA complets Context
// write to internal register
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_SHAMD5_IRIS register.
//
//******************************************************************************
#define DTHE_SHAMD5_IRIS_DIN 0x00000004 // input Data movement is done
#define DTHE_SHAMD5_IRIS_COUT 0x00000002 // Context output is done
#define DTHE_SHAMD5_IRIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_SHAMD5_IMIS register.
//
//******************************************************************************
#define DTHE_SHAMD5_IMIS_DIN 0x00000004 // input Data movement is done
#define DTHE_SHAMD5_IMIS_COUT 0x00000002 // Context output is done
#define DTHE_SHAMD5_IMIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_SHAMD5_ICIS register.
//
//******************************************************************************
#define DTHE_SHAMD5_ICIS_DIN 0x00000004 // Clear “input Data movement done”
// flag
#define DTHE_SHAMD5_ICIS_COUT 0x00000002 // Clear “Context output done” flag
#define DTHE_SHAMD5_ICIS_CIN 0x00000001 // Clear “context input done” flag
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_AES_IMST register.
//
//******************************************************************************
#define DTHE_AES_IMST_DOUT 0x00000008 // Data out: this interrupt is
// raised when DMA finishes writing
// last word of the process result
#define DTHE_AES_IMST_DIN 0x00000004 // Data in: this interrupt is
// raised when DMA writes last word
// of input data to internal FIFO of
// the engine
#define DTHE_AES_IMST_COUT 0x00000002 // Context out: this interrupt is
// raised when DMA complets the
// output context movement from
// internal register
#define DTHE_AES_IMST_CIN 0x00000001 // context in: this interrupt is
// raised when DMA complets Context
// write to internal register
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_AES_IRIS register.
//
//******************************************************************************
#define DTHE_AES_IRIS_DOUT 0x00000008 // Output Data movement is done
#define DTHE_AES_IRIS_DIN 0x00000004 // input Data movement is done
#define DTHE_AES_IRIS_COUT 0x00000002 // Context output is done
#define DTHE_AES_IRIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_AES_IMIS register.
//
//******************************************************************************
#define DTHE_AES_IMIS_DOUT 0x00000008 // Output Data movement is done
#define DTHE_AES_IMIS_DIN 0x00000004 // input Data movement is done
#define DTHE_AES_IMIS_COUT 0x00000002 // Context output is done
#define DTHE_AES_IMIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_AES_ICIS register.
//
//******************************************************************************
#define DTHE_AES_ICIS_DOUT 0x00000008 // Clear “output Data movement
// done” flag
#define DTHE_AES_ICIS_DIN 0x00000004 // Clear “input Data movement done”
// flag
#define DTHE_AES_ICIS_COUT 0x00000002 // Clear “Context output done” flag
#define DTHE_AES_ICIS_CIN 0x00000001 // Clear “context input done” flag
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_DES_IMST register.
//
//******************************************************************************
#define DTHE_DES_IMST_DOUT 0x00000008 // Data out: this interrupt is
// raised when DMA finishes writing
// last word of the process result
#define DTHE_DES_IMST_DIN 0x00000004 // Data in: this interrupt is
// raised when DMA writes last word
// of input data to internal FIFO of
// the engine
#define DTHE_DES_IMST_CIN 0x00000001 // context in: this interrupt is
// raised when DMA complets Context
// write to internal register
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_DES_IRIS register.
//
//******************************************************************************
#define DTHE_DES_IRIS_DOUT 0x00000008 // Output Data movement is done
#define DTHE_DES_IRIS_DIN 0x00000004 // input Data movement is done
#define DTHE_DES_IRIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_DES_IMIS register.
//
//******************************************************************************
#define DTHE_DES_IMIS_DOUT 0x00000008 // Output Data movement is done
#define DTHE_DES_IMIS_DIN 0x00000004 // input Data movement is done
#define DTHE_DES_IMIS_CIN 0x00000001 // context input is done
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_DES_ICIS register.
//
//******************************************************************************
#define DTHE_DES_ICIS_DOUT 0x00000008 // Clear “output Data movement
// done” flag
#define DTHE_DES_ICIS_DIN 0x00000004 // Clear “input Data movement done”
// flag
#define DTHE_DES_ICIS_CIN 0x00000001 // Clear "context input done” flag
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_EIP_CGCFG register.
//
//******************************************************************************
#define DTHE_EIP_CGCFG_EIP29_CFG \
0x00000010 // Clock gating protocol setting
// for EIP29T. 0 Follow direct
// protocol 1 Follow idle_req/ack
// protocol.
#define DTHE_EIP_CGCFG_EIP75_CFG \
0x00000008 // Clock gating protocol setting
// for EIP75T. 0 Follow direct
// protocol 1 Follow idle_req/ack
// protocol.
#define DTHE_EIP_CGCFG_EIP16_CFG \
0x00000004 // Clock gating protocol setting
// for DES. 0 Follow direct
// protocol 1 Follow idle_req/ack
// protocol.
#define DTHE_EIP_CGCFG_EIP36_CFG \
0x00000002 // Clock gating protocol setting
// for AES. 0 Follow direct
// protocol 1 Follow idle_req/ack
// protocol.
#define DTHE_EIP_CGCFG_EIP57_CFG \
0x00000001 // Clock gating protocol setting
// for SHAMD5. 0 Follow direct
// protocol 1 Follow idle_req/ack
// protocol.
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_EIP_CGREQ register.
//
//******************************************************************************
#define DTHE_EIP_CGREQ_Key_M 0xF0000000 // When “0x5” write “1” to lower
// bits [4:0] will set the bit.
// Write “0” will be ignored When
// “0x2” write “1” to lower bit
// [4:0] will clear the bit. Write
// “0” will be ignored for other key
// value, regular read write
// operation
#define DTHE_EIP_CGREQ_Key_S 28
#define DTHE_EIP_CGREQ_EIP29_REQ \
0x00000010 // 0 request clock gating 1
// request to un-gate the clock.
#define DTHE_EIP_CGREQ_EIP75_REQ \
0x00000008 // 0 request clock gating 1
// request to un-gate the clock.
#define DTHE_EIP_CGREQ_EIP16_REQ \
0x00000004 // 0 request clock gating 1
// request to un-gate the clock.
#define DTHE_EIP_CGREQ_EIP36_REQ \
0x00000002 // 0 request clock gating 1
// request to un-gate the clock.
#define DTHE_EIP_CGREQ_EIP57_REQ \
0x00000001 // 0 request clock gating 1
// request to un-gate the clock.
//******************************************************************************
//
// The following are defines for the bit fields in the DTHE_O_CRC_CTRL register.
//
//******************************************************************************
#define DTHE_CRC_CTRL_INIT_M 0x00006000 // Initialize the CRC 00 use SEED
// register context as starting
// value 10 all “zero” 11 all
// “one” This is self clearing. With
// first write to data register this
// value clears to zero and remain
// zero for rest of the operation
// unless written again
#define DTHE_CRC_CTRL_INIT_S 13
#define DTHE_CRC_CTRL_SIZE 0x00001000 // Input data size 0 32 bit 1 8
// bit
#define DTHE_CRC_CTRL_OINV 0x00000200 // Inverse the bits of result
// before storing to CRC_RSLT_PP0
#define DTHE_CRC_CTRL_OBR 0x00000100 // Bit reverse the output result
// byte before storing to
// CRC_RSLT_PP0. applicable for all
// bytes in word
#define DTHE_CRC_CTRL_IBR 0x00000080 // Bit reverse the input byte. For
// all bytes in word
#define DTHE_CRC_CTRL_ENDIAN_M \
0x00000030 // Endian control [0] swap byte
// in half-word [1] swap half word
#define DTHE_CRC_CTRL_ENDIAN_S 4
#define DTHE_CRC_CTRL_TYPE_M 0x0000000F // Type of operation 0000
// polynomial 0x8005 0001
// polynomial 0x1021 0010
// polynomial 0x4C11DB7 0011
// polynomial 0x1EDC6F41 1000 TCP
// checksum TYPE in DTHE_S_CRC_CTRL
// & DTHE_S_CRC_CTRL should be
// exclusive
#define DTHE_CRC_CTRL_TYPE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DTHE_O_CRC_SEED register.
//
//******************************************************************************
#define DTHE_CRC_SEED_SEED_M 0xFFFFFFFF // Starting seed of CRC and
// checksum operation. Please see
// CTRL register for more detail.
// This resister also holds the
// latest result of CRC or checksum
// operation
#define DTHE_CRC_SEED_SEED_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the DTHE_O_CRC_DIN register.
//
//******************************************************************************
#define DTHE_CRC_DIN_DATA_IN_M \
0xFFFFFFFF // Input data for CRC or checksum
// operation
#define DTHE_CRC_DIN_DATA_IN_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_CRC_RSLT_PP register.
//
//******************************************************************************
#define DTHE_CRC_RSLT_PP_RSLT_PP_M \
0xFFFFFFFF // Input data for CRC or checksum
// operation
#define DTHE_CRC_RSLT_PP_RSLT_PP_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_RAND_KEY0 register.
//
//******************************************************************************
#define DTHE_RAND_KEY0_KEY_M 0xFFFFFFFF // Device Specific Randon key
// [31:0]
#define DTHE_RAND_KEY0_KEY_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_RAND_KEY1 register.
//
//******************************************************************************
#define DTHE_RAND_KEY1_KEY_M 0xFFFFFFFF // Device Specific Randon key
// [63:32]
#define DTHE_RAND_KEY1_KEY_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_RAND_KEY2 register.
//
//******************************************************************************
#define DTHE_RAND_KEY2_KEY_M 0xFFFFFFFF // Device Specific Randon key
// [95:34]
#define DTHE_RAND_KEY2_KEY_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// DTHE_O_RAND_KEY3 register.
//
//******************************************************************************
#define DTHE_RAND_KEY3_KEY_M 0xFFFFFFFF // Device Specific Randon key
// [127:96]
#define DTHE_RAND_KEY3_KEY_S 0
#endif // __HW_DTHE_H__