micropython/stmhal/hal/f7/inc/stm32f7xx_hal_flash_ex.h

469 lines
19 KiB
C
Raw Normal View History

/**
******************************************************************************
* @file stm32f7xx_hal_flash_ex.h
* @author MCD Application Team
* @version V1.0.1
* @date 25-June-2015
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_FLASH_EX_H
#define __STM32F7xx_HAL_FLASH_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
/** @addtogroup FLASHEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
* @{
*/
/**
* @brief FLASH Erase structure definition
*/
typedef struct
{
uint32_t TypeErase; /*!< Mass erase or sector Erase.
This parameter can be a value of @ref FLASHEx_Type_Erase */
uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
This parameter must be a value of @ref FLASHEx_Sectors */
uint32_t NbSectors; /*!< Number of sectors to be erased.
This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
This parameter must be a value of @ref FLASHEx_Voltage_Range */
} FLASH_EraseInitTypeDef;
/**
* @brief FLASH Option Bytes Program structure definition
*/
typedef struct
{
uint32_t OptionType; /*!< Option byte to be configured.
This parameter can be a value of @ref FLASHEx_Option_Type */
uint32_t WRPState; /*!< Write protection activation or deactivation.
This parameter can be a value of @ref FLASHEx_WRP_State */
uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
The value of this parameter depend on device used within the same series */
uint32_t RDPLevel; /*!< Set the read protection level.
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
uint32_t BORLevel; /*!< Set the BOR Level.
This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY /
IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY. */
uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0.
This parameter can be a value of @ref FLASHEx_Boot_Address */
uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1.
This parameter can be a value of @ref FLASHEx_Boot_Address */
} FLASH_OBProgramInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
* @{
*/
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
* @{
*/
#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00) /*!< Sectors erase only */
#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01) /*!< Flash Mass erase activation */
/**
* @}
*/
/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
* @{
*/
#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01) /*!< Device operating range: 2.1V to 2.7V */
#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02) /*!< Device operating range: 2.7V to 3.6V */
#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
/**
* @}
*/
/** @defgroup FLASHEx_WRP_State FLASH WRP State
* @{
*/
#define OB_WRPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable the write protection of the desired bank 1 sectors */
#define OB_WRPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable the write protection of the desired bank 1 sectors */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Type FLASH Option Type
* @{
*/
#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */
#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */
#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */
#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!< BOR option byte configuration */
#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10) /*!< Boot 0 Address configuration */
#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20) /*!< Boot 1 Address configuration */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
* @{
*/
#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
it s no more possible to go back to level 1 or 0 */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
* @{
*/
#define OB_WWDG_SW ((uint32_t)0x10) /*!< Software WWDG selected */
#define OB_WWDG_HW ((uint32_t)0x00) /*!< Hardware WWDG selected */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint32_t)0x20) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint32_t)0x00) /*!< Hardware IWDG selected */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
* @{
*/
#define OB_STOP_NO_RST ((uint32_t)0x40) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint32_t)0x00) /*!< Reset generated when entering in STOP */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
* @{
*/
#define OB_STDBY_NO_RST ((uint32_t)0x80) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint32_t)0x00) /*!< Reset generated when entering in STANDBY */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
* @{
*/
#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000) /*!< Freeze IWDG counter in STOP mode */
#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x40000000) /*!< IWDG counter active in STOP mode */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
* @{
*/
#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000) /*!< Freeze IWDG counter in STANDBY mode */
#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000) /*!< IWDG counter active in STANDBY mode */
/**
* @}
*/
/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
* @{
*/
#define OB_BOR_LEVEL3 ((uint32_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
#define OB_BOR_LEVEL2 ((uint32_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
#define OB_BOR_LEVEL1 ((uint32_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
#define OB_BOR_OFF ((uint32_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
/**
* @}
*/
/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
* @{
*/
#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000) /*!< Boot from ITCM RAM (0x00000000) */
#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040) /*!< Boot from System memory bootloader (0x00100000) */
#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080) /*!< Boot from Flash on ITCM interface (0x00200000) */
#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000) /*!< Boot from Flash on AXIM interface (0x08000000) */
#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000) /*!< Boot from DTCM RAM (0x20000000) */
#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004) /*!< Boot from SRAM1 (0x20010000) */
#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013) /*!< Boot from SRAM2 (0x2004C000) */
/**
* @}
*/
/** @defgroup FLASH_Latency FLASH Latency
* @{
*/
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
/**
* @}
*/
/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
* @{
*/
#define FLASH_MER_BIT (FLASH_CR_MER) /*!< MER bit to clear */
/**
* @}
*/
/** @defgroup FLASHEx_Sectors FLASH Sectors
* @{
*/
#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
/**
* @}
*/
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
* @{
*/
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000) /*!< Write protection of Sector0 */
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000) /*!< Write protection of Sector1 */
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000) /*!< Write protection of Sector2 */
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000) /*!< Write protection of Sector3 */
#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000) /*!< Write protection of Sector4 */
#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000) /*!< Write protection of Sector5 */
#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000) /*!< Write protection of Sector6 */
#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000) /*!< Write protection of Sector7 */
#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000) /*!< Write protection of all Sectors */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FLASHEx_Exported_Functions
* @{
*/
/** @addtogroup FLASHEx_Exported_Functions_Group1
* @{
*/
/* Extension Program operation functions *************************************/
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
* @{
*/
#define FLASH_SECTOR_TOTAL 8
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
* @{
*/
/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
* @{
*/
#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
((VALUE) == FLASH_TYPEERASE_MASSERASE))
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
((RANGE) == FLASH_VOLTAGE_RANGE_4))
#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
((VALUE) == OB_WRPSTATE_ENABLE))
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
#define IS_OB_BOOT_ADDRESS(ADDRESS) (((ADDRESS) == OB_BOOTADDR_ITCM_RAM) || \
((ADDRESS) == OB_BOOTADDR_SYSTEM) || \
((ADDRESS) == OB_BOOTADDR_ITCM_FLASH) || \
((ADDRESS) == OB_BOOTADDR_AXIM_FLASH) || \
((ADDRESS) == OB_BOOTADDR_DTCM_RAM) || \
((ADDRESS) == OB_BOOTADDR_SRAM1) || \
((ADDRESS) == OB_BOOTADDR_SRAM2))
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
((LEVEL) == OB_RDP_LEVEL_1) ||\
((LEVEL) == OB_RDP_LEVEL_2))
#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
((LATENCY) == FLASH_LATENCY_1) || \
((LATENCY) == FLASH_LATENCY_2) || \
((LATENCY) == FLASH_LATENCY_3) || \
((LATENCY) == FLASH_LATENCY_4) || \
((LATENCY) == FLASH_LATENCY_5) || \
((LATENCY) == FLASH_LATENCY_6) || \
((LATENCY) == FLASH_LATENCY_7) || \
((LATENCY) == FLASH_LATENCY_8) || \
((LATENCY) == FLASH_LATENCY_9) || \
((LATENCY) == FLASH_LATENCY_10) || \
((LATENCY) == FLASH_LATENCY_11) || \
((LATENCY) == FLASH_LATENCY_12) || \
((LATENCY) == FLASH_LATENCY_13) || \
((LATENCY) == FLASH_LATENCY_14) || \
((LATENCY) == FLASH_LATENCY_15))
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END))
#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & (uint32_t)0xFF00FFFF) == 0x00000000) && ((SECTOR) != 0x00000000))
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
* @{
*/
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_FLASH_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/