micropython/ports/stm32/boards/LEGO_HUB_NO6/appupdate.py

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

52 lines
1.8 KiB
Python
Raw Normal View History

# Application firmware update funcion for LEGO_HUB_NO6.
# MIT license; Copyright (c) 2022 Damien P. George
from micropython import const
import struct, machine, fwupdate, spiflash, pyb
_IOCTL_BLOCK_COUNT = const(4)
_IOCTL_BLOCK_SIZE = const(5)
_SPIFLASH_UPDATE_KEY_ADDR = const(1020 * 1024)
_SPIFLASH_UPDATE_KEY_VALUE = const(0x12345678)
_FILESYSTEM_ADDR = const(0x8000_0000 + 1024 * 1024)
# Roundabout way to get actual filesystem size from config.
# This takes into account the 1M "reserved" section of the flash memory.
flash = pyb.Flash(start=0)
_FILESYSTEM_LEN = flash.ioctl(_IOCTL_BLOCK_COUNT, None) * flash.ioctl(_IOCTL_BLOCK_SIZE, None)
def update_app(filename):
print(f"Updating application firmware from {filename}")
# Create the elements for the mboot filesystem-load operation.
elems = fwupdate.update_app_elements(filename, _FILESYSTEM_ADDR, _FILESYSTEM_LEN)
if not elems:
return
# Create the update key.
key = struct.pack("<I", _SPIFLASH_UPDATE_KEY_VALUE)
# Create a SPI flash object.
spi = machine.SoftSPI(
sck=machine.Pin.board.FLASH_SCK,
mosi=machine.Pin.board.FLASH_MOSI,
miso=machine.Pin.board.FLASH_MISO,
baudrate=50_000_000,
)
cs = machine.Pin(machine.Pin.board.FLASH_NSS, machine.Pin.OUT, value=1)
# We can't use pyb.Flash() because we need to write to the "reserved" 1M area.
flash = spiflash.SPIFlash(spi, cs)
# Write the update key and elements to the SPI flash.
flash.erase_block(_SPIFLASH_UPDATE_KEY_ADDR)
flash.write(_SPIFLASH_UPDATE_KEY_ADDR, key + elems)
# Enter mboot with a request to do a filesystem-load update.
# If there is a power failure during the update (eg battery removed) then
# mboot will read the SPI flash update key and elements and retry.
machine.bootloader(elems)