micropython/ports/stm32/boards/VCC_GND_F407VE/mpconfigboard.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

165 lines
5.9 KiB
C
Raw Normal View History

/* This file is part of the MicroPython project, http://micropython.org/
* MIT License; Copyright (c) 2021 Damien P. George
*/
// STM32F407VET6 Mini by VCC-GND Studio
// http://vcc-gnd.com/
// https://item.taobao.com/item.htm?ft=t&id=523361737493
// https://www.aliexpress.com/wholesale?SearchText=STM32F407VET6+Mini
// DFU mode can be accessed by switching BOOT0 DIP ON (towards USB)
#define MICROPY_HW_BOARD_NAME "VCC-GND STM32F407VE"
#define MICROPY_HW_MCU_NAME "STM32F407VE"
#define MICROPY_HW_FLASH_FS_LABEL "VCCGNDF407VE"
// 1 = use internal flash (512 KByte)
// 0 = use external SPI flash
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
#define MICROPY_HW_HAS_FLASH (1)
#define MICROPY_HW_ENABLE_RNG (1)
#define MICROPY_HW_ENABLE_RTC (1)
#define MICROPY_HW_ENABLE_DAC (1)
#define MICROPY_HW_ENABLE_USB (1)
#define MICROPY_HW_ENABLE_SDCARD (1)
// HSE is 25MHz
#define MICROPY_HW_CLK_PLLM (25) // divide external clock by this to get 1MHz
#define MICROPY_HW_CLK_PLLN (336) // PLL clock in MHz
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) // divide PLL clock by this to get core clock
#define MICROPY_HW_CLK_PLLQ (7) // divide core clock by this to get 48MHz
// The board has a 32kHz crystal for the RTC
#define MICROPY_HW_RTC_USE_LSE (1)
#define MICROPY_HW_RTC_USE_US (0)
// #define MICROPY_HW_RTC_USE_CALOUT (1) // turn on/off PC13 512Hz output
// USART1
#define MICROPY_HW_UART1_TX (pin_A9) // PA9,PB6
#define MICROPY_HW_UART1_RX (pin_A10) // PA10,PB7
// USART2
#define MICROPY_HW_UART2_TX (pin_A2) // PA2,PD5
#define MICROPY_HW_UART2_RX (pin_A3) // PA3,PD6
#define MICROPY_HW_UART2_RTS (pin_A1) // PA1,PD4
#define MICROPY_HW_UART2_CTS (pin_A0) // PA0,PD3
// USART3
#define MICROPY_HW_UART3_TX (pin_D8) // PB10,PC10,PD8
#define MICROPY_HW_UART3_RX (pin_D9) // PB11,PC11,PD9
#define MICROPY_HW_UART3_RTS (pin_D12) // PB14,PD12
#define MICROPY_HW_UART3_CTS (pin_D11) // PB13,PD11
// UART4
#define MICROPY_HW_UART4_TX (pin_A0) // PA0,PC10
#define MICROPY_HW_UART4_RX (pin_A1) // PA1,PC11
// UART5
#define MICROPY_HW_UART5_TX (pin_C12) // PC12
#define MICROPY_HW_UART5_RX (pin_D2) // PD2
// USART6
#define MICROPY_HW_UART6_TX (pin_C6) // PC6,PG14
#define MICROPY_HW_UART6_RX (pin_C7) // PC7,PG9
// I2C buses
#define MICROPY_HW_I2C1_SCL (pin_B6) // PB8,PB6
#define MICROPY_HW_I2C1_SDA (pin_B7) // PB9,PB7
#define MICROPY_HW_I2C2_SCL (pin_B10) // PB10
#define MICROPY_HW_I2C2_SDA (pin_B11) // PB11
#define MICROPY_HW_I2C3_SCL (pin_A8) // PA8
#define MICROPY_HW_I2C3_SDA (pin_C9) // PC9
// AT24C08 EEPROM on I2C1 0x50-0x53
// I2S buses
// I2S2_CK PB13
// I2S2_MCK PC6
// I2S2_SD PB15
// I2S2_WS PB12
// I2S3_CK PB3
// I2S3_MCK PC7
// I2S3_SD PB5
// I2S3_WS PA15
// SPI buses
#define MICROPY_HW_SPI1_NSS (pin_A4) // PA4
#define MICROPY_HW_SPI1_SCK (pin_A5) // PA5,PB3
#define MICROPY_HW_SPI1_MISO (pin_A6) // PA6,PB4
#define MICROPY_HW_SPI1_MOSI (pin_A7) // PA7,PB5
#define MICROPY_HW_SPI2_NSS (pin_B12) // PB12
#define MICROPY_HW_SPI2_SCK (pin_B13) // PB13
#define MICROPY_HW_SPI2_MISO (pin_B14) // PB14
#define MICROPY_HW_SPI2_MOSI (pin_B15) // PB15
#define MICROPY_HW_SPI3_NSS (pin_A15) // PA15
#define MICROPY_HW_SPI3_SCK (pin_B3) // PB3
#define MICROPY_HW_SPI3_MISO (pin_B4) // PB4
#define MICROPY_HW_SPI3_MOSI (pin_B5) // PB5
// CAN buses
#define MICROPY_HW_CAN1_TX (pin_B9) // PB9,PD1,PA12
#define MICROPY_HW_CAN1_RX (pin_B8) // PB8,PD0,PA11
#define MICROPY_HW_CAN2_TX (pin_B13) // PB13
#define MICROPY_HW_CAN2_RX (pin_B12) // PB12
// DAC
// DAC_OUT1 PA4
// DAC_OUT2 PA5
// LEDs
#define MICROPY_HW_LED1 (pin_B9) // blue
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
// If using external SPI flash
#if !MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
// The board does not have onboard SPI flash. You need to add an external one.
#define MICROPY_HW_SPIFLASH_SIZE_BITS (4 * 1024 * 1024) // W25X40 - 4 Mbit (512 KByte)
// #define MICROPY_HW_SPIFLASH_SIZE_BITS (32 * 1024 * 1024) // W25Q32 - 32 Mbit (4 MByte)
// #define MICROPY_HW_SPIFLASH_SIZE_BITS (64 * 1024 * 1024) // W25Q64 - 64 Mbit (8 MByte)
// #define MICROPY_HW_SPIFLASH_SIZE_BITS (128 * 1024 * 1024) // W25Q128 - 128 Mbit (16 MByte)
#define MICROPY_HW_SPIFLASH_CS (pin_A4) // also in board_init.c
#define MICROPY_HW_SPIFLASH_SCK (pin_A5)
#define MICROPY_HW_SPIFLASH_MISO (pin_A6)
#define MICROPY_HW_SPIFLASH_MOSI (pin_A7)
#define MICROPY_BOARD_EARLY_INIT VCC_GND_F407VE_board_early_init
void VCC_GND_F407VE_board_early_init(void);
extern const struct _mp_spiflash_config_t spiflash_config;
extern struct _spi_bdev_t spi_bdev;
#define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \
(op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \
spi_bdev_ioctl(&spi_bdev, (op), (arg)) \
)
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n))
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n))
#endif
// SD card detect switch
#define MICROPY_HW_SDCARD_DETECT_PIN (pin_A8)
#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP)
#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET)
// 1 - PC10 - DAT2/RES
// 2 - PC11 - CD/DAT3/CS
// 3 - PD2 - CMD/DI
// 4 - VCC - VDD
// 5 - PC12 - CLK/SCLK
// 6 - GND - VSS
// 7 - PC8 - DAT0/D0
// 8 - PC9 - DAT1/RES
// 9 SW2 - GND
// 10 SW1 - PA8
// USB config
#define MICROPY_HW_USB_FS (1)
// #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
// #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)