micropython/ports/esp32/partitions-2MiB.csv

# Notes: the offset of the partition table itself is set in
# $IDF_PATH/components/partition_table/Kconfig.projbuild.
# Name,     Type, SubType, Offset,   Size, Flags
nvs,        data, nvs,     0x9000,   0x6000,
phy_init,   data, phy,     0xf000,   0x1000,
factory,    app,  factory, 0x10000,  0x160000,
vfs,        data, fat,     0x170000, 0x50000,
esp32/partitions: Update comments in files regarding offset. 2020-04-30 15:22:33 +08:00			`# Notes: the offset of the partition table itself is set in`
esp32/makeimg.py: Load sizes from partition table and verify data fits. Changes introduced are: - the application offset is now loaded from the partition table instead of being hard-coded to 0x10000 - maximum size of all sections is computed using the partition table - an error is generated if any section overflows its allocated space - remaining bytes are printed for each section Signed-off-by: Damien George <damien@micropython.org> 2021-06-11 13:28:07 +08:00			`# $IDF_PATH/components/partition_table/Kconfig.projbuild.`
esp32: Add support for ESP32-D2WD with 2MiB internal flash. This patch adds a partitions file for the D2WD and a new board GENERIC_D2WD which runs on these chip variants. Resolves issue #4986. 2019-08-07 22:22:15 +08:00			`# Name, Type, SubType, Offset, Size, Flags`
			`nvs, data, nvs, 0x9000, 0x6000,`
			`phy_init, data, phy, 0xf000, 0x1000,`
esp32/partitions-2MiB.csv: Update table so firmware fits. The current MicroPython app size is larger than the size allocated in the partitions table. 2020-08-02 03:41:55 +08:00			`factory, app, factory, 0x10000, 0x160000,`
			`vfs, data, fat, 0x170000, 0x50000,`